To Assemble Bagger, Bagger adjustment

1. Front bagger tube

2. Vinyl binding

	5
	0
	9
1	2
1	0
	2

3.	Spreader bars	3
4.	Retainer spring
5.	Vinyl binding	4

906 02

6.	Dump handle tube		6
7.	Clevis pin 10 x 44mm
8.	Retainer spring		7
9.	Cap	8
		8

		9	07
		9	029
1.	Top Surfaces Even		6MM (1/4") - 9MM (3/8")
2.	Horizontal Adjustment Bracket
3.	Vertical Adjustment Bracket		1
4.	Bagger Latch	2	1
4.	Bagger Latch

02967

To Assemble Bagger

•Unfold bag by pivoting front bagger tube all the way forward and pressing the bottom vinyl binding onto the tube.

•Inside the bag, install spreader bars and retainer springs onto pins on both sides of bag as shown.

•Press the vinyl bindings onto the sides of front bagger tube.

•Slide the bagger dump handle through the hole in the bagger top, install the clevis pin 10 x 44mm and secure with retainer spring.

•Push cap over end of bagger dump handle.

NOTE: For future use, the clevis pin may be removed in order to use the handle to clear the chute in the event it has become clogged.

Bagger adjustment

For proper bag function and appearance, it may be nec- essary to adjust the bagger assembly. There should be 6mm (1/4")-9mm (3/8") gap between the bagger top and fender and the bagger top surface should be even with the top surface of the fender. To adjust bagger position:

Horizontal adjustment

•Slightly loosen the nuts securing the bagger RH and LH horizontal adjustment brackets. Loosen only enough so the brackets keep their position, but allow them to be moved.

•Move the brackets the amount forward or backward you wish the bag assembly to move. Retighten the nuts securely.

Vertical adjustment

•Slightly loosen the nuts securing the vertical adjustment brackets. Loosen only enough so the brackets keep their position, but allow them to be moved.

•Move the brackets the amount up or down you wish the bag assembly to move. Retighten the nuts securely.

•Reinstall the bagger assembly and check the bagger to fender fit. If necessary, repeat the procedure until proper fit is attained.

•After proper fit is attained, remove bagger from tractor and install bagger latch (4) to tractor back plate as shown. Tighten securely.

•Install and carefully lower bagger to actuate latch.

•Measure distance between bagger and latch as shown. If distance is not 10mm - 16mm carefully remove bagger and repeat vertical adjustment as needed.

0298 3

10MM (7/16") - 16MM (5/8")

To convert to bagging, mulching or discharge See "Section 5" of this manual.

P12597RB specifications

The Partner Tech P12597RB is a cutting-edge point-of-sale (POS) terminal that has gained recognition in the retail and hospitality sectors due to its robust features and advanced technology. Designed to facilitate efficient transactions, this terminal combines an intuitive interface with powerful hardware, making it an ideal solution for businesses of all sizes.

One of the standout features of the P12597RB is its 15-inch resistive touchscreen. This display not only offers vivid visuals but is also designed for durability, capable of withstanding the rigors of a busy environment. The touchscreen functions seamlessly, providing staff with a responsive and user-friendly experience, allowing quick access to essential functions like inventory management, sales tracking, and reporting.

In terms of performance, the P12597RB is equipped with a reliable Intel Celeron processor, which ensures swift operation and multitasking capability. This allows businesses to run several applications simultaneously without any lag, significantly enhancing productivity during peak hours. The device also features an impressive memory specification, with options for RAM that enable faster data processing and smoother running of the POS software.

Connectivity is another key area where the P12597RB excels. It comes with multiple connectivity options, including USB, Ethernet, and serial ports, enabling seamless integration with various peripherals such as barcode scanners, receipt printers, and cash drawers. This flexibility ensures that businesses can tailor their POS setup according to specific operational needs.

Security is paramount in any POS system, and Partner Tech has prioritized this aspect in the design of the P12597RB. With built-in security features and compliance with PCI standards, the terminal ensures that sensitive customer data is protected during transactions. This helps build trust with customers and maintains the integrity of business operations.

Additionally, the P12597RB boasts a compact and stylish design, allowing it to fit into a variety of retail and hospitality environments without taking up excessive space. Its fanless design further contributes to its silent operation, making it an excellent choice for settings where noise could be a distraction.

In summary, the Partner Tech P12597RB is a sophisticated POS terminal equipped with a high-performance touchscreen, robust processing capabilities, extensive connectivity options, and essential security features. Its versatility and efficiency make it a valuable asset for any retail or hospitality business aiming to streamline operations and enhance customer service.