Blade Removal

For best results mower blades must be kept sharp. Replace bent or damaged blades.

•Raise mower to highest position to allow access to blades.

•Remove hex bolt, lock washer and flat washer securing blade.

•Install new or resharpened blade with trailing edge up towards deck as shown.

IMPORTANT: To ensure proper assembly, center hole in blade must align with star on mandrel assembly.

•Reassemble hex bolt, lock washer and flat washer in exact order as shown.

•Tighten bolt securely (37-47 Nm).

IMPORTANT: Blade bolt is grade 8 heat treated

Für beste Mähergebnisse müssen die Messerbalken immer opti mal geschliffen sein. Wechseln Sie verbogene oder beschädigte Messerbalken sofort aus.

WECHSELN DER MESSERBALKEN:

•Fahren Sie das Mähdeck in die höchste Position, um Zugriff zu den Messerbalken zu bekommen.

•Lösen Sie die Sechskantschraube, die Sicherungss- cheibe und die Unterlegscheibe, die den Messerbalken fixieren.

•Montieren Sie den neuen bzw. den neu geschärften Messerbalken, wobei die hintere (Hilfschneid-) Kante wie abgebildet nach oben zur Plattform zeigen muß.

WICHTIG: Um eine richtige Montage zu gewährleisten, muß die Zentrierbohrung des Messerbalkens mit der Messerauf- nahme übereinstimmen.

•Montieren Sie nun in der beschriebenen Reihenfolge die Sechskantschraube, die Sicherungsscheibe sowie die Unterlegscheibe.

•Ziehen Sie die Schrauben gut fest (37-47 Nm).

WICHTIG: Die Sechskantschraube des Messerbalkens ist wärmebehandelt.

Pour avoir une bonne qualité de coupe, il est indispensable que les lames soient bien affûtées. Remplacer immédiate- ment les lames endommagées ou tordues.

POUR REMPLACER LES LAMES:

•Relever le carter de coupe au maximum afin d'avoir accès aux lames.

•Devisser la vis à tête hexagonale avec la rondelle frein et la rondelle plate qui fixent la lame sur le moyeu.

•Mettre en place la nouvelle lame, ou la lame d'origine réaffûtée, avec le tranchant tourné vers le haut comme indiqué.

ATTENTION: Pour que la lame soit bien montée, l'alésage central en forme d'étoile de la lame doit être parfaitement emboîté sur l'étoile du moyeu.

•Revisser la vis à tête hexagonale avec sa rondelle frein et sa rondelle plate en respectant l'ordre prescrit.

•Serrer la vis avec un couple de serrage (37-47 Nm).

ATTENTION: La vis de fixation de la lame a été traitée ther- miquement en classe 8, bien respecter le couple de serrage.

Para alcanzar resultados mejores las cuchillas de la segadora hay que mantenerlos afilados. sustituya las cuchillas torcidos y estropeados.

C'MO DESMONTAR LAS CUCHILLAS

•Eleve la segadora hasta su posición más alta para poder alcanzar las cuchillas.

•Desentornille el tornillo de cabeza de seis facetas, la arandela elastica (de resorte) y la arandela plana que sujetan la cuchilla.

•Monte la cuchilla nueva o afilada con el canto trasero hacia arriba adjunto a la plataforma como indicado.

IMPORTANTE: Para asegurar un montaje correcto el orifi- cio central de la cuchilla hay que ajustarlo a la estrella del mandril.

•Monte otra vez el tornillo de cabeza de seis facetas, la arandela elastica y la arandela plana en sucesion exacta como es indicado.

•Apriete establemente el tornillo (37-47 Nm).

IMPORTANTE: El tornillo de la cuchilla es de tratamiento tèrmico-clase 8.

Per avere il migliore risultato di taglio, è necessario che le lame siano ben affilate. Sostituirle se usurate o danneggiate.

RIMOZIONE DELLE LAME

•Sollevare la macchina per avere accesso alle lame.

•Disserrare il bullone a testa esagonale, la rondella elastica e la rondella piatta che fissano la lama.

•Montare una nuova lama o una lama con palettaura posteriore rivolta verso il piatto, come indicato.

ATTENZIONE: Per assicurare un buon fissaggio centrale della lama, è necessario che questa combaci perfettamente con il mozzo.

•Montareilnuovobulloneatestaesagonale,larondellaelas- tica e la rondella piatta nell'ordine esatto, come indicato.

•Restringere bene il bullone di bloccaggio della lama (37- 47 Nm).

ATTENZIONE: Il bullone di bloccaggio della lama è stato sottoposto a trattamento termico di classe 8.

Voor de beste resultaten moeten de maaimessen scherp gehouden worden. Vervang gebogen of beschadigde messen.

MES VERWIJDEREN

•Zet de maaier in de hoogste stand om bij de messen te kunnen.

•Verwijder de zeskantbout, de veerring, en vlakke ring die het mes op zijn plaats houden.

•Monteer een nieuw of geslepen mes waarbij het sleep (hulp) mes omhoog naar het maaidek gericht moet zijn, zie afbeelding.

BELANGRIJK: Om zeker te zijn van goede montage moet het centrumgat in het mes passen met de ster op de mandrijn.

•Bevestig de zeskantbout, veerring en vlakke ring weer in precies dezelfde volgorde als op de afbeelding te zien is.

•Haal de bouten stevig aan (37-47 Nm).

BELANGRIJK: De bout van het mes is warmtebehandeld volgens klasse 8.

P12597RB specifications

The Partner Tech P12597RB is a cutting-edge point-of-sale (POS) terminal that has gained recognition in the retail and hospitality sectors due to its robust features and advanced technology. Designed to facilitate efficient transactions, this terminal combines an intuitive interface with powerful hardware, making it an ideal solution for businesses of all sizes.

One of the standout features of the P12597RB is its 15-inch resistive touchscreen. This display not only offers vivid visuals but is also designed for durability, capable of withstanding the rigors of a busy environment. The touchscreen functions seamlessly, providing staff with a responsive and user-friendly experience, allowing quick access to essential functions like inventory management, sales tracking, and reporting.

In terms of performance, the P12597RB is equipped with a reliable Intel Celeron processor, which ensures swift operation and multitasking capability. This allows businesses to run several applications simultaneously without any lag, significantly enhancing productivity during peak hours. The device also features an impressive memory specification, with options for RAM that enable faster data processing and smoother running of the POS software.

Connectivity is another key area where the P12597RB excels. It comes with multiple connectivity options, including USB, Ethernet, and serial ports, enabling seamless integration with various peripherals such as barcode scanners, receipt printers, and cash drawers. This flexibility ensures that businesses can tailor their POS setup according to specific operational needs.

Security is paramount in any POS system, and Partner Tech has prioritized this aspect in the design of the P12597RB. With built-in security features and compliance with PCI standards, the terminal ensures that sensitive customer data is protected during transactions. This helps build trust with customers and maintains the integrity of business operations.

Additionally, the P12597RB boasts a compact and stylish design, allowing it to fit into a variety of retail and hospitality environments without taking up excessive space. Its fanless design further contributes to its silent operation, making it an excellent choice for settings where noise could be a distraction.

In summary, the Partner Tech P12597RB is a sophisticated POS terminal equipped with a high-performance touchscreen, robust processing capabilities, extensive connectivity options, and essential security features. Its versatility and efficiency make it a valuable asset for any retail or hospitality business aiming to streamline operations and enhance customer service.