before permanently mounting.
A. REMOTE TEMPERATURE SENSOR
1.Remove the mounting bracket from the remote temperature sensor.
2.Mount using either screws or adhesive tape.
3.Reattach the remote temperature sensor to the mounting bracket.
B.THE TEMPERATURE STATION
1.The indoor temperature station comes with the table stand already mounted. If you wish to use the
2.To wall mount, remove the table stand. To do this, pull down on the stand from the rear and rotate forward.
a)Fix a screw (not included) into the desired wall, and place the indoor temperature station onto the screw using the hanging hole on the backside. Gently pull the indoor temperature station down to lock the screw into place.
TROUBLESHOOTING
NOTE: For problems not solved, please contact Oreck Customer Service at
10