Oreck WS-7013U instruction manual Ii. Time A. Setting The Time

Page 8

5.The indoor temperature station should now show: "-:- -" in the TIME LCD, and temperatures in the INDOOR and OUTDOOR LCD’s.

II.TIME

A. SETTING THE TIME

1. Press and hold the "SET" button for 5 seconds, "12h" will appear in the

TIME LCD.

2.Press and release the "MIN/MAX" button to select either 12h time (am/pm) or 24h time.

3.Press and release the "SET" button 2 times, the hour will flash in the upper left corner.

Image 8

Contents WS-7013U Wireless 433 MHz Temperature Station Instruction Manual Register your product on the web atTABLE OF CONTENTS Detailed Setup GuideFeatures TopicINVENTORY OF CONTENTS ADDITIONAL EQUIPMENT5. Instruction Manual and Warranty Card 6. 2 AAA 1.5V batteries 1. The indoor temperature station FigureQUICK SETUP 2. Batteries should be out of both units for 10 minutes4. DO NOT PRESS ANY BUTTONS FOR 10 MINUTES The remote temperature sensor has a range of80 feet in a straight line DETAILED SETUP GUIDE Press and release the SET button once more to complete the setupI. BATTERY INSTALLATION A. REMOTE TEMPERATURE SENSOR B. INDOOR TEMPERATURE STATION II. TIME A. SETTING THE TIME 4. Press and release the MIN/MAX button to set the hour V. MOUNTING IV. FEATURES A. MINIMUM AND MAXIMUM TEMPERATURESB. RESETTING THE MINIMUM AND MAXIMUM TEMPERATURES B. THE TEMPERATURE STATION TROUBLESHOOTINGA. REMOTE TEMPERATURE SENSOR Solution Do not submerge in water MAINTENANCE AND CARE INSTRUCTIONSOpening the casings voids the warranty. Do not try to repair the unit SPECIFICATIONS Measuring TemperaturesBatteries-Alkaline recommended Temperature check1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE WARRANTY INFORMATIONFCC ID OMO-01RX Receiver OMO-01TX transmitter 2002 Oreck Holdings, LLC. All rights reserved