Oreck WS-7013U instruction manual Press and release the SET button once more to complete the setup

3. The hour will now be flashing.

a.Press and release the "MIN/MAX" button until the correct hour is shown.

Note: When in the 12h mode "PM" is displayed under the word "TIME" during PM hours. During the AM hours this area will be blank.

b.When the correct hour is shown, press and release the "SET" button once.

4.The minutes will now be flashing.

a.Press and release the "MIN/MAX" button until the correct minutes are displayed.

Press and release the SET button once more to complete the setup.

DETAILED SETUP GUIDE

I. BATTERY INSTALLATION

A. REMOTE TEMPERATURE SENSOR

1. Remove the mounting bracket.

2.Remove the battery cover.

3.Observing the correct polarity, install (2) AA batteries—make sure they do not spring free, or start-up problems may occur. Replace the cover.

5