Scag Power Equipment SVR48V-24FX Operating Instructions, Controls and Instrument Identification

R

Section 4

OPERATING INSTRUCTIONS

CAUTION

Do not attempt to operate this mower unless you have read this manual. Learn the location and purpose of all controls and instruments before you operate this mower.

4.1CONTROLS AND INSTRUMENT IDENTIFICATION

Before operating the mower, familiarize yourself with all mower and engine controls. Knowing the location, function and operation of these controls is important for safe and efficient operation of the mower.

2.Mower Deck Switch (Figure 4-1). Used to engage and disengage the mower drive system. Pulling up on the switch will engage the deck drive. Pushing down on the switch will disengage the deck drive.

3.Engine Choke Control (Figure 4-1). Used to start a cold engine.

4.Engine Throttle Control (Figure 4-1). Used to control the engine speed. Pushing the lever forward increases engine speed. Pulling the lever back decreases engine speed. Full back position is the IDLE position. Full forward is the cutting position.

5.Hourmeter (Figure 4-1). Indicates the number of hours the engine has been operated. It operates whenever the engine is running. Has preset maintenance reminders for engine and hydraulic system oil changes. Will start flashing scheduled

1.Ignition Switch (Figure 4-1). The ignition switch is used to start the engine and has three positions; OFF, ON, and START.

maintenance 2 hours before preset time and continue flashing until 2 hours after. Automatically resets.

ENGINE CHOKE

CONTROL

ENGINE

THROTTLE

CONTROL

HOURMETER

IGNITION SWITCH	CUTTING HEIGHT
	ADJUSTMENT

DECK LIFT	NEUTRAL LOCK
	CONTROL
	FUEL GAUGE
MOWER DECK	RIGHT STEERING
SWITCH
PARKING BRAKE	CONTROL
CONTROL
LEFT STEERING
CONTROL

Figure 4-1. Controls and Instruments

10