Scag Power Equipment SVR36A-20FX, SVR52V-26FX, SVR48V-24FX manual Lubrication

R

Section 7

MAINTENANCE CHART - RECOMMENDED SERVICE INTERVALS (CONT'D)

		HOURS
						Procedure	Comments
Break-In	8	40	100	200	500
(First 10)
				X		Check hardware for tightness
				X		Apply grease to fittings	See paragraph 7.2
				X		Check hydraulic oil level	See paragraph 7.3
				X		Change engine oil	See paragraph 7.4
				X		Change engine oil filter	See paragraph 7.4
					X	Replace engine fuel filter	See paragraph 7.5
					X	Apply grease to fittings	See paragraph 7.2

XDrain hydraulic system and See paragraph 7.3 replace oil and filter

X Adjust electric PTO clutch See paragraph 6.6

7.2 Lubrication

GREASE FITTING LUBRICATION CHART

	LOCATION	LUBRICATION INTERVAL		LUBRICANT	NO. OF
					PLACES
1	- Caster Wheel Pivot	100	Hours / Bi-Weekly	Chassis Grease	2
2	- Caster Wheel Bearings	100	Hours / Monthly	Chassis Grease	2
3	- Brake Actuator Lever	200	Hours / Bi-Weekly	Chassis Grease	1
4	- Cutter Deck Spindles	40 Hours / Weekly		+ US Lithium MP White Grease	2 / 3
5	- Cutter Deck Pusharms	100	Hours / Monthly	Chassis Grease	2
6	- Cutter Deck Bellcranks	100	Hours / Monthly	Chassis Grease	2

30