Scag Power Equipment STT61V-25KBD Cutter Deck, Hydraulic System, Weights and Dimensions, SMT61V

Section 3				R
Travel Speed:
Forward				0-12
Reverse				0-6 MPH
-NOTE- The machine will travel at 12mph for transport purposes. For best cutting performance the forward travel
speed should be adjusted depending upon the cutting conditions.
3.4 Cutter Deck
Type	Floating, Adjustable, Anti-scalping, Hybrid Design Combines Out-front and Belly-mount Designs
Construction		10-gauge steel reinforced with 7-gauge (3/16") Support Plate. 7-gauge (3/16") deck skirt.
True Cutting Width:
61V			61" (155.0 cm)
72V			72" (182.9 cm)
Cutting Height Adjustment		Foot-Operated Lever Adjustment from Operator's Seat, 1.00" to 6.00" in 1/4"increments
Cutter Blades			0.197 Thick, Milled Edge, Wear Resistant Marbain™
61V			Three (3) 21" blades
72V			Three (3) 24.5" blades
Blade Engagement			Electric Blade Engagement Clutch with Control Panel Switch Connected
			to the Cutter Deck Gearbox through a Drive Shaft.
Discharge Opening			Extra Wide 11.5" Discharge Opening with Spring Loaded Discharge Chute
Discharge Chute			Black, Polypropylene (Plastic), Flexible
Caster Wheels			13 X 6.00 Flat Free
Spindles		Heavy-duty 1-1/8" Top Dimension Spindle Shaft, Cast Housing, Taper Roller Bearing,
		Low Maintenance with Top Access Grease Fitting and Grease Overfill Relief Poppet
Spindle Pulleys			Split Steel with Easily Removed Taper Hubs
Cutter Deck Belts			B-section with Kevlar Cord. Self-Adjusting, Self-Tightening
61V			Scag Part Number - 481558
72V			Scag Part Number - 481980
Electric Clutch Type			Ogura Electric Clutch
Drive Shaft			Clamp Yoke Shaft With Two High Speed U-Joints
3.5 Hydraulic System
Hydraulic Oil Filter			10 Micron Spin-on Element Type
Hydraulic Reservoir			Nylon; 3 Quart Capacity
3.6 Weights and Dimensions			SMT61V	SMT72V
Length			87.5"	87.5"
Tracking Width			55"	55"
Overall Width w/chute down			73.5"	83"
Overall Width w/chute up			62"	73"
Overall Height w/ROPS up			67.5"	67.5"
Overall Height w/ROPS down			56.5"	56.5"
Operating Weight			1540# (Kubota), 1700# (Cat)	1750#
3.7 PRODUCTIVITY			SMT61V	SMT72V
Cutting Width			61"	72"
Acres Per Day			23.7	28

The preceding chart will aid you in determining how many acres your Scag mower will cut per day. The chart is an estimate based on 8 hours per day cutting time at 6 MPH with an allowance for overlap and turns.

11