Scag Power Equipment STT61V-25KBD manual Section

Page 9

Section 2

R

4.When using any attachment, never direct the discharge of material toward bystanders or allow anyone near the machine while in operation.

5.Before attempting to start the engine, with the operator in the seat, disengage power to the cutter deck, place the steering control levers in the neutral position and engage the parking brake.

6.If the mower discharge ever plugs, shut off the engine, remove the ignition key, and wait for all movement to stop before removing the obstruction.

caution

Do not touch the engine or the muffler while the engine is running or immediately after stopping. These areas may be hot enough to cause a burn.

WARNING

DO NOT use your hand to dislodge the clogged discharge chute. Use a stick or other device to remove clogged material after the engine has stopped running and the blades have stopped turning.

7.Be alert for holes, rocks, roots and other hidden hazards in the terrain. Keep away from any drop- offs. Beware of overhead obstructions (low limbs, etc.), underground obstacles (sprinklers, pipes, tree roots, etc.). Cautiously enter a new area. Be alert for hidden hazards.

8.Disengage power to cutter deck before backing up. Do not mow in reverse unless absolutely necessary and then only after observation of the entire area behind the mower. If you must mow in reverse, maintain a constant lookout to the rear of the machine and mow slowly.

9.DO NOT turn sharply. Use care when backing up.

10.Disengage power to cutter deck before crossing roads, walks or gravel drives.

11.Mow only in daylight or good artificial light.

12.NEVER raise the deck with the blades engaged.

13.Take all possible precautions when leaving the machine unattended, such as disengaging the mower, lowering the attachments, setting the parking brake, stopping the engine, and removing the key.

14.Disengage power to the attachments when transporting or when not in use.

15.The machine and attachments should be stopped and inspected for damage after striking a foreign object, and damage should be repaired before restarting and operating the machine.

danger

DO NOT run the engine inside a building or a confined area without proper ventilation. Exhaust fumes are hazardous and contain carbon monoxide which can cause brain injury and death.

16.Keep hands and feet away from cutter blades and moving parts. Contact can injure.

17.Transport the mower using a heavy duty trailer or truck. Insure the trailer or truck has all of the necessary lighting and markings as required by laws, codes, and ordinances. Secure a trailer with a safety chain.

18.Be cautious when loading and unloading onto trailers or trucks. Use only a full width ramp. Ramp angle should be no more than 15 degrees. Back up the ramp and drive down forward.

19.When transporting the mower, make sure the park brake is engaged, the steering control levers are in the neutral position, the engine is off with the key removed, and the wheels have been blocked.

20.Tie the mower down securely using straps, chains, cable, or ropes. Both front and rear straps must be directed down and outward from machine.

21.Use care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

22.NEVER leave the machine running unattended.

5

Image 9
Contents OPERATOR’S Manual STT61V-28CAT-SS Remember Your Mower is only AS Safe AS the OperatorTable of Contents Adjustments Parking Brake Adjustment Travel Adjustments Introduction General InformationDirection Reference Servicing The Engine and Drive TraiN ComponentsSymbol Description SymbolsSafety Information Signal WordsBefore Operation considerations Operation Considerations Section Foldable Roll-Over Protection System Roll-over protection systemSeat Belt Inspection Using a spark arrestor Maintenance Considerations & storageDiesel Fuel only Safety and Instructional DecalsPower head SpecificationsEngine ElectricalCutter Deck Weights and DimensionsHydraulic System SMT61VControls and Instrument Identification Operating InstructionsDump Valve Control Safety Interlock SystemStarting the Engine Ground Travel and SteeringForward Travel Reverse Travel Engaging the Deck Drive Cutter BladesHillside Operation Rotating BladesParking the Mower After OperationAdjusting Cutting Height Moving Mower with Engine StoppedRecommendations for Mowing Adjusting the Steering Levers Adjusting the Height Adjust PedalTowing optional hitch accessory Condition Cause Cure Troubleshooting Cutting ConditionsCut, or Rough Contour Troubleshooting Cutting Conditions ContdScalping Blades Hitting Parking Brake Adjustment AdjustmentsNeutral Adjustment Travel AdjustmentsThrottle Control and Choke Adjustments Belt AdjustmentTracking Adjustment Belt Alignment Cutter Deck AdjustmentsCutter Deck Level Cutter Deck PitchCutter Deck Stop Cutter Deck HeightCustom-Cut Baffle Adjustment Custom-Cut Baffle AdjustmentClutch Air Gap Adjustment Electric clutch adjustmentMaintenance Chart Recommended Service Intervals MaintenanceLubrication Maintenance Chart Recommended Service Intervals ContdLubrication Fitting Points Changing Hydraulic Oil Checking Hydraulic Oil LevelEngine Fuel System Engine OilEngine Air Cleaner BatteryCleaning and/or Replacing Air Cleaner Element Replacing In-Line Fuel Filter ElementsCutter Blades Charging the BatteryBlade Inspection Jump StartingBlade Replacement TiresBlade Sharpening Cooling System Cutter Deck GearboxChecking Lubricant Level Changing LubricantCleaning the Radiator Debris Screen BODY, DECK, and UpholsteryChecking The Fan Belt Tension Scag Approved Attachments and Accessories Illustrated Parts ListIllustrated Parts List Section 61V & 72V Cutter Deck Description Cutter Deck Controls 481764 Link, Deck Lift Sheet Metal Components Sheet Metal Components Section STT ROLL-OVER Protection System with Suspension Seat 9292 Deck Drive Components Deck Drive Components Engine & Attaching Parts CAT Diesel Available through the individual engine manufacturer Radiator & Attaching Parts CAT Diesel Radiator & Attaching Parts CAT Diesel Engine & Attaching Parts Kubota Diesel 424633 Latch, Hood Brake and Steering Components Brake and Steering Components Fuel and Hydraulic System CAT Diesel Fuel and Hydraulic System CAT Diesel Fuel and Hydraulic System Kubota Diesel Hose Assy, 1/2 ID Tank to Filter Base Section BDP-16A Hydraulic Pump Assembly with Cooling Fan Hex Screw, Flanged Head M10 x 1.50-65mm Electrical System CAT Diesel Electrical System CAT Diesel Electrical System Kubota Diesel 483643 Cover, Sealed Single 483641 Manufactured Under ONE or More Replacement Decals and Information PlatesSttkbd Decals Page2 COM Electrical Schematic CAT DieselGlow Plug POS NEG Volt Meter PTO Switch Module Relay Electrical Schematic Kubota DieselLimited Warranty Commercial Equipment