Rubbermaid 5L10 instruction manual

Page 1

5L10

Congratulations and thank you for purchasing a Rubbermaid storage building.

BEFORE YOU BEGIN – BUILDING CODES

Be sure to check your local building codes, ordinances and restrictions, and applicable neighborhood governances.

BEFORE YOU BEGIN – SURFACE PREPARATION

To ensure proper assembly and performance your shed needs to be built on a solid, level surface. A concrete or patio surface, or a treated-wood platform is recommended.

BEFORE YOU BEGIN – LOCATION

When choosing a location in your yard make sure you choose an area with easy access and one that provides proper drainage for water to run away from the shed location.

BEFORE YOU BEGIN – PREASSEMBLY

Thoroughly review all assembly steps (it is important that the steps are followed in the correct order). Review the parts list and make sure that no parts are missing.

IMPORTANT – DO NOT RETURN TO THE STORE

For assistance with your Rubbermaid Storage Building or for additional product information call our toll-free Consumer Service number: 1-888-895-2110

M–F: 8:30 a.m. to 5:00 p.m. EST

or visit us online at: www.rubbermaid.com.

Installation Steps:

1.Site Preparation

2.Floor

3.Walls

4.Roof & Doors

5.Finishing

55 ¼"

76 ¾"

27 ½"

Note: Be sure to keep this instruction manual and your original store receipt to ensure our Consumer Service

 

Department can accurately and quickly assist you if necessary.

1780068

Image 1
Contents 5L10 5L10 Care & USE Site PreparationFloor Installation Wall Panel G Installation Wall Panel D Installation Wall Panel H Installation a Wall Panel F Installation Roof Panel J & Door Installation Page Finishing Installation Click Door Finishing Installation