Quantum 9700 user manual Shot Counter, Fmark, Volume, GPIBAddr optional

Page 17

Shot Counter

The 9700 includes a nine (9) digit shot counter. The maximum count displayed is 4,294,967,295 after which the count rolls over to zero. To manually reset the counter

to zero, press the Left or Right arrow key. You will prompted to press the key

to verify that you want to zero the counter. If you press any other key, the shot counter will not be reset.

Fmark

The character used as a decimal point can be set to either a "." (period) or a "," (comma). The period is generally used in North America, while the comma is used in Europe.

Volume

The key click volume may be adjusted from 0 (disabled) to 9. The default value is 2.

GPIB:Addr (optional)

For systems with the optional GPIB interface this menu sets the GPIB address. The valid address range is from 0 to 30.

13

Image 17
Contents Series Pulse Generator Table of Contents Mode Pulse Modes External Trigger Mode Single Shot Mode Iii Warranty Parts ListIntroduction Technical SupportCustom Modifications Safety IssuesPage Page Front Panel Controls and ConnectorsDisplay Control ButtonsOutput Sections Left ButtonExternal Trigger Rear PanelSync Out InterlockAC Input Gpib Port optionalOverview Operating InstructionsItem Edit Mode Numeric Input ModeMode Pulse Modes Main MenuNDly Tn Delay Enable TnEnableChannel Menus NIamps TnIampsRecall Configuration Store ConfigurationStore/Recall/Misc. Menus NWid TnPulse WidthShot Counter VolumeFmark GPIBAddr optionalPage Serial RS232 Pinout Command LanguageOkcrlf Command ProtocolCommunication Protocol Communication Commands Command ListDelays SpecificationsOutputs Replacing the Fuse MaintenancePage Long Pulse Option Specifications Custom Features