Kickback Prevention
To avoid kickbacks, observe the following:
Easy cutting with almost no kickback is possible with- in a blade segment between 8 and 11 o'clock (Fig 37)
Operation within a blade segment between 12 and 2 o'clock presents severe hazards, especially when using metal cutting tools.
Cutting operations within a blade segment betweep 11 and 12 |
|
o'clock,and between 2 and 5 o'clock,must only be performed |
|
by train& and experienced operators, and then only at their | I |
own risk. |
|
CUTTING TOOLS |
| |
Employ only the correct cutting tool for the 1 o b . M | I | |
Nylon Cutting Head: | ||
| ||
Exclusively designed for cutting along walls. fences. grass |
| |
edges, trees, posts, etc. (supplementing the grass mower). |
|
Fig. 37
1
| Star Blade: |
\ | For cutting thick materials, such as weeds high grass, bushes, |
| shrubs, underwood, thicket, etc (max 2 cm or 314 in) Perform |
| this cutting work by swinging the brush cutter eveniy in half- |
| circles from right to left (similar to using a scythe) |
Maintenance instructions |
|
| Fig. 38 |
Before commencing work, check the caridition of the cutter, |
|
| |
|
|
| |
protective devices and also the shoulder strap Particular |
|
|
|
attention should be paid to the cutting blades which must be |
|
|
|
correctly sharpened (Fig. 38) |
|
|
|
Turn off the engine and remove spark plug connector when | I |
|
|
replacing or sharpening cutting tools, and also when cleaning |
| ~ | |
the cutter or cutting tool. |
| Blade cover | i |
|
|
| |
Use the blade cover when you transport or store the brush |
|
|
|
cutter, to prevent injury and damage to the blade (Fig.39). |
|
|
|
16