Jensen CDX6311 instruction manual Display Options, Menu Operation

Page 11

CDX6311

NOTE: LCD panels may take longer to respond when subjected to cold temperatures for an extended period of time. In addition, the visibility of the numbers on the LCD may decrease slightly. The LCD display will return to normal when the temperature increases to a normal range.

Display Options

Press DISPLAY/MENU (7) to navigate through the following options:

Tuner: FREQ > Spectrum > PTM Message

CDP: Elapsed Time > Spectrum > PTM Message

XM mode: Category Name > Artist Name > Song Title > Spectrum > PTM Message > Channel Name

Menu Operation

A second function of the DISPLAY / MENU button (7) is to access a menu of radio options. Press DISPLAY / MENU for more than three seconds to access the menu. “Menu” will appear in the display. Navigate the menu by pressing DISPLAY / MENU momentariiy to move forward to the next option. The menu can also be navigated by using the UP TUNING (10) or DOWN TUNING (11) button to move to the next or previous option. Once the desired option appears in the display, adjust that option by rotating the volume control within five seconds.

The following options are adjusted through this menu feature:

Contrast

The contrast level of the display is set at “CONTRAST 05” by default. Rotate the volume control to adjust the contrast level from “00” to “10”.

Dimmer

The dimmer feature of the display is set to “DIMMER High” by default. Rotate the volume control to turn the dimmer to the low setting.

XM Scroll

This option determines whether or not the XM display text scrolls continuously across the screen. The default setting is “OFF”. Select “ON” to make the display text scroll continuously. When set to off, you can view the display information by continuously pressing the DISPLAY button (7).

NOTE: The XM Scroll option only appears when an XM tuner is connected.

Clock Format

This option allows selection of a 12 hour or 24 hour clock format. “CLK FORMAT 12H” is the default setting. Rotate the volume control to change to the 24 hour clock format.

Time Set

The time on the clock will be set to “12:00” as the default. Program the current time by rotating the volume control clockwise to adjust the minutes and counter-clockwise to adjust the hours.

Local / Distance Selector

This feature is used to designate the strength of the signals at which the radio will stop during automatic tuning. “Distant” is the default, allowing the radio to stop at a broader range of signals. To set the unit to select only strong local stations during automatic tuning, rotate the volume control to select “Local”. “LOC” appears in the display.

Frequency Spacing

This option allows the selection of the frequency spacing appropriate for your area. “AREA U.S.A.” is the default setting. Rotate the volume control to select the “Latin”, “Europe” or “Oirt” options.

Programmable Turn-on Volume

Use the “VOL PGM” option to select the default volume the radio will assume when first turned on. To program a specific start-up volume level, rotate the volume control to select the desired level.

Beep Tone

The beep tone feature allows the selection of an audible beep tone to be heard each time a button is pressed on the face of the radio. “BEEP TONE On” is the default display. Rotate the volume control to select the “BEEP TONE Off” option.

Illumination Color

The “COLOR” option allows selection between two colors for the backlight illumination of the unit. “COLOR 1” is the default display and will illuminate the unit in blue backlight. Rotate the volume control to select “COLOR 2”, which will illuminate the display in red backlight.

Selectable Clock Display

When the selectable clock display (CLK ON LCD) feature is activated, the clock and default greeting note will appear in the display when the radio is turned off but still connected to the ignition wire. “CLK ON LCD On” is the default display for this option. To select that the clock and greeting not be displayed when the unit is powered off, rotate the volume control to select “CLK ON LCD Off”.

Key Light On/Off

When the key light feature is activated (ON) the preset buttons and the rest of the front panel function buttons remain lit when the unit is turned off, but the ignition key remains on. Turn the volume control to select “Key Light Off” if you would prefer the buttons not remain illuminated when the unit is off.

7

Image 11
Contents CDX6311 Page Table DES Matières Table of ContentsContenido CDX6311 Introduction FeaturesOptional Accessories Tools and Supplies Pre-installationPreparation Connect Wires WiringWiring with a Wiring Adapter Purchased Separately Installation Remove Radio Kit InstallationISO Installation Operation Menu Operation Display OptionsFront Panel Release Reset ButtonTuner Operation Selecting a Station Accessing XM Radio ModeXM Radio Operation Displaying the Identification ID CodeCD Player Operation Jport Operation CD Changer OperationCompact Discs Remote ControlCare and Maintenance CD PlayerSpecifications TroubleshootingMonth Limited Warranty CDX6311 Accesorios Opcionales IntroducciónCaracterísticas Preinstalación PreparaciónHerramientas y Provisiones Conecte los cables Diagrama de cableado / Código de coloresCableado Asistencia Técnica InstalaciónFusibles Reconexión de la BateríaCómo Desmontar el Radio Equipo de InstalaciónInstalación ISO Operación Operación del Menú Opciones de PantallaRemover el Panel Delantero Botón de Reconfigurar ResetSaludo Operación DE LA Radio Modos Del Sintonizador Operation DE LA Radio XMUsar La Radio XM Exhibir el Número de la IdentificaciónOperación DEL Reproductor DE CD Operación DEL Jport Operación DEL Cambiador DE CDCuidado del Equipo de CD Control RemotoCuidado Y Mantenimiento Información de DiscosEspecificationes Corrección DE ProblemasGarantia Limitade DE 12 Meses CDX6311 Fonctions Accessoires facultatifsOutils et matériel Pré-installationPréparation Raccordement des fils Le diagramme de câblage / Le code de couleursCâblage Aide technique Branchement de la radio récepteur satellite facultatifRebranchement de la batterie Installation universelle à laide du manchon du montage Retrait de radio Installation ISOInstallation de la trousse Mise en sourdine Volume / contrôleur audioOpération AlimentationOpération du menu Options daffichageLe bouton de réglage Relâchement du panneau davantFonctionnement DE LA Radio Fonctionnement DE LA Radio XM Fonctionnement DU Lecteur CD Sélection du disque Mode changeur de CDOpération DE Changeur DE CD Opération JportInformation disque Prêt À Être TélécommandéSoin ET Entretien Soins pour la platine CDDépannage Garantie Limitée DE 12 Mois