CD CHANGER OPERATION
Please call Jensen technical support at
After the CD changer has been installed and properly connected, press the Reset button to initialize the installation. Refer to the owner’s manual included with the CD changer for instructions on installing, loading and using the CD magazine.
CD Changer Mode
Press MODE (2) during radio or disc play to select operation of the CD changer. “CDC” will appear in the display. Disc play will begin, and the disc and track numbers will be shown in the display. If a new magazine has been loaded into the changer, play will begin from the first track of the first disc. If a magazine was already in the changer, play will resume where it ended.
Disc Select (UP/DN)
To select a disc for play, use the UP (17) button to advance to a higher disc or the DN (16) button to move back to a lower disc. The number of the disc in play appears on the display.
Other Features
The Play/Pause, Scan, Repeat, Shuffle, Track Select and Fast Forward/Fast Reverse features for CD changer play are accessed in the same methods as for regular disc play. Refer to the CD Player Operation section of this manual for details.
CDX6311
CD Changer Error Codes
If problems arise during CD changer operation, the following error codes may appear in the display:
|
To resolve any of the above problems, eject the magazine from the changer and verify that the discs are clean, undamaged and loaded correctly. Pressing the reset button may help, but will erase the time and preset memories. If the suggested measures do not solve the problem, contact an authorized warranty station near you for further assistance.
JPORT OPERATION
After the jPORT has been installed and connected, press the RESET button to initialize the installation. The jPORT can be used to control your iPod or an optional CD Changer. Refer to the owner’s manual included with the jPORT for instructions regarding the operation of your jPORT.
12