Poulan 966479401, SM30SB, 115225426 Optional Attachments, Safety Rules, Operator Safety

Page 4

OPTIONAL ATTACHMENTS

These attachments used in combination with the specified powerhead have been evaluated to ANSI B175.3--2003, “Grass Trimmers and Brushcutters -- Safety Requirements”. These combinations have been evaluated by Underwriter’s Laboratories Inc. (UL) and are conse- quently UL listed:

Powerhead model Attachments

Type

SM30SB

Trimmer head

WE fixed line

Brushcutter attachment

PP4000C

 

Cutting attachment / guard, part. no.

545053902 / 545003325

952711610

These attachments used in combination with the specified powerhead have been evaluated to applicable ISO-- and EN safety requirement standards by the Swedish Machinery Testing Institute:

Attachments

Type

Part. no.

 

 

 

Edger attachment

PP1000E

952711607

 

 

 

Cultivator attachment

PP2000T

952711608

Pruner attachment

PP5000P

952711612

 

 

 

Pruner attachment

PP5500P

952711672

SAFETY RULES

WARNING: When using gardening appliances, basic safety precautions must al- ways be followed to reduce the risk of fire and serious injury. Read and follow all instructions. This power unit can be dangerous! Operator is responsible for following instructions and warnings on unit and in manual. Read entire instruction manual before using unit! Be thor- oughly familiar with the controls and the prop- er use of the unit. Restrict the use of this unit to persons who have read, understand, and will follow the instructions and warnings on the unit and in the manual. Never allow chil- dren to operate this unit.

INSTRUCTION

SAFETY INFORMATION

MANUAL

ON THE UNIT

DANGER: Never use blades with line trimmer attachment. Never use flailing devices with any attachment. This unit (when used with supplied line trimmer attachment) is designed for line trimmer use only. Use of any other ac- cessories or attachments with line trimmer at- tachment will increase the risk of injury.

If situations occur which are not covered in this manual, use care and good judgment. If you need assistance, contact your authorized service dealer or call 1-800-554--6723.

OPERATOR SAFETY

SDress properly. Always wear safety glasses or similar eye protection when operating, or performing maintenance, on your unit (safety glasses are available). Eye protection should be marked Z87.

SAlways wear face or dust mask if operation is dusty.

SAlways wear heavy, long pants, long sleeves, boots, and gloves. Wearing safety leg guards

is recommended.

S Always wear foot protection. Do not go barefoot or wear sandals. Stay clear of spinning line.

SSecure hair above shoulder length. Secure or remove loose clothing or clothing with loosely hanging ties, straps, tassels, etc. They can be caught in moving parts.

S Being fully covered also helps protect you from debris and pieces of toxic plants thrown by spinning line.

SStay Alert. Do not operate this unit when you are tired, ill, upset or under the influence of

alcohol, drugs, or medication. Watch what you are doing; use common sense.

SWear hearing protection.

SNever start or run inside a closed room or

building. Breathing exhaust fumes can kill.Keep handles free of oil and fuel.

SKeep handles free of oil and fuel.

SAlways keep engine on the right hand side of your body.

SHold the unit firmly with both hands.Keep trimmer head (or other optional attachment) below waist level and away from all parts of your body. Do not raise engine above your waist.

SKeep all parts of your body away from muffler and spinning line (or other optional

attachment). Keep engine below waist level. A hot muffler can cause serious burns.

S Keep firm footing and balance. Do not overreach or use from unstable surfaces such as ladders, trees, steep slopes, rooftops, etc.

SUse only in daylight or good artificial light.

4

Image 4
Contents Manual de Instrucciones Manuel d’Instructions Table of Contents Identification of Safety SymbolsIdentification of Safety Symbols Operator Safety Safety RulesOptional Attachments Unit / Maintenance Safety Fuel SafetyLine Trimmer Safety Additional Safety RulesEdger Safety BLOWER/VACUUM SafetyBrushcutter Safety HandlebarCultivator Safety Hedge Trimmer SafetyPole Pruner Safety Cut from your right to your leftSnow Thrower Safety High speed causing injuryKnow how to stop quickly AnotherInstalling Trimmer ATTACH- Ment AssemblyAttaching the Shield Operation HOW to Stop Your Unit HOW to Start Your UnitStarting a Cold Engine Starting a Warm EngineInstalling Optional ATTACH- Ments Removing Trimmer ATTACH- Ment or Other Optional AttachmentsOperating Position Remove the shaft cap from the attach- ment if presentGood clean job Cutting MethodsTip of the line Does the cutting Work areaMaintenance Service and Adjustments Carburetor Idle Speed AdjustmentReplacing the Line Replacing the Cutting HeadSeasonal Storage Fuel SystemEngine OtherTroubleshooting Table Cause Remedy Limited Warranty Statesville RoadCanada, contact Ligations The U.S. EnvironmentalIntermediate 125 hours Extended 300 hours

115225426, 966479401, SM30SB specifications

The Poulan SM30SB is a notable addition to the range of outdoor power equipment, specifically designed for lawn care enthusiasts and professionals seeking a reliable and efficient solution for maintaining their gardens and lawns. This robust machine is equipped with several cutting-edge features and technologies that enhance its performance and usability, making it a preferred choice for many.

One of the standout features of the Poulan SM30SB is its powerful engine. The model is typically powered by a 30cc two-stroke engine that delivers impressive torque and performance, allowing users to tackle a wide variety of lawn tasks. This high-performance engine ensures that users can efficiently manage different types of vegetation, from delicate weeds to tougher shrubs.

The design of the SM30SB emphasizes user comfort and control. It is equipped with an ergonomic handle that is adjustable to accommodate different users, providing a comfortable grip during operation. This design reduces fatigue during extended use, which can be particularly beneficial for those large mowing jobs. Additionally, the lightweight structure of the unit allows for easy maneuverability, enabling users to navigate around obstacles with ease.

Another key characteristic of the Poulan SM30SB is its advanced cutting technology. The model features a dual-line bump feed cutting head, which allows for quick and easy line replacement and ensures a clean and precise cut every time. This system increases efficiency, enabling the user to complete tasks more swiftly without sacrificing quality.

The SM30SB also incorporates fuel-efficient technologies that minimize fuel consumption while maximizing output. This not only has a positive environmental impact but also means users spend less on fuel while achieving outstanding results. Its easy-start feature eliminates the hassle of struggling with ignition, allowing users to get started on their tasks without delays.

Maintenance is often a concern for outdoor equipment, and the design of the Poulan SM30SB addresses this with its easy-access air filter and spark plug. Regular maintenance can be performed quickly, ensuring that the equipment remains in top condition and ready for use whenever needed.

In conclusion, the Poulan SM30SB, model numbers 115225426 and 966479401, is a versatile and efficient tool that combines power with user-friendly features. With its robust engine, ergonomic design, advanced cutting technology, and environmental considerations, it stands out as an excellent choice for anyone looking to maintain their outdoor space effectively.