Poulan 115225426, SM30SB, 966479401 instruction manual Maintenance

Page 14

MAINTENANCE

WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments.

HELPFUL TIP

IMPORTANT: Have all

repairs other than the rec- ommended maintenance described in the instruction manual performed by an authorized service dealer.

If any dealer other than an authorized service dealer performs work on the product, Poulan PRO may not pay for repairs under warranty. It is your re- sponsibility to maintain and perform general maintenance.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws

S Assist Handle Screw S Debris Shield

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

S ON/STOP Switch -- Ensure ON/STOP switch functions properly by moving the switch to the STOP position. Make sure en- gine stops; then restart engine and continue.

SFuel Tank -- Discontinue use of unit if fuel tank shows signs of damage or leaks.

SDebris Shield -- Discontinue use of unit if debris shield is damaged.

INSPECT AND CLEAN UNIT AND DECALS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and decals using a damp cloth with a mild deter- gent.

SWipe off unit with a clean dry cloth.

CLEAN AIR FILTER

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean after every 5 hours of operation.

1.Clean the cover and the area around it to keep dirt from falling into the carburetor chamber when the cover is removed.

2. Loosen knob by turning counterclock- wise. Remove air filter cover and air filter.

NOTE: To avoid creating a fire hazard or producing harmful evaporative emissions, do not clean filter in gasoline or other flammable solvent.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Replace parts.

Air filter Air filter cover

Knob

INSPECT MUFFLER AND SPARK ARRESTING SCREEN

WARNING: The muffler on this prod- uct contains chemicals known to the State of California to cause cancer.

As your unit is used, carbon deposits build up on the muffler and spark arresting screen and must be removed to avoid creating a fire haz- ard or affecting engine performance.

For normal homeowner use, the muffler and spark arresting screen will not require any service. After 50 hours of use, we recom- mend that your muffler be serviced or re- placed by an authorized service dealer.

REPLACE SPARK PLUG

Replace the spark plug each year to ensure the engine starts easier and runs better. In- spect spark plug every 25 hours of usage. Clean and/or replace as necessary. Set spark plug gap at 0.025 inch (0.6 mm). Ignition tim- ing is fixed and nonadjustable.

NOTE: This spark ignition system complies with the Canadian standard ICES--002.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and discard.

3.Replace with Champion RZ-7C spark plug and tighten securely with a 3/4 inch (19 mm) socket wrench.

4.Reinstall the spark plug boot.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Manual de Instrucciones Manuel d’Instructions Table of Contents Identification of Safety SymbolsIdentification of Safety Symbols Optional Attachments Safety RulesOperator Safety Line Trimmer Safety Unit / Maintenance SafetyFuel Safety Additional Safety RulesBrushcutter Safety Edger SafetyBLOWER/VACUUM Safety HandlebarPole Pruner Safety Cultivator SafetyHedge Trimmer Safety Cut from your right to your leftKnow how to stop quickly Snow Thrower SafetyHigh speed causing injury AnotherAttaching the Shield AssemblyInstalling Trimmer ATTACH- Ment Operation Starting a Cold Engine HOW to Stop Your UnitHOW to Start Your Unit Starting a Warm EngineOperating Position Installing Optional ATTACH- MentsRemoving Trimmer ATTACH- Ment or Other Optional Attachments Remove the shaft cap from the attach- ment if presentTip of the line Good clean jobCutting Methods Does the cutting Work areaMaintenance Replacing the Line Service and AdjustmentsCarburetor Idle Speed Adjustment Replacing the Cutting HeadEngine Seasonal StorageFuel System OtherTroubleshooting Table Cause Remedy Canada, contact Limited WarrantyStatesville Road Ligations The U.S. EnvironmentalIntermediate 125 hours Extended 300 hours

115225426, 966479401, SM30SB specifications

The Poulan SM30SB is a notable addition to the range of outdoor power equipment, specifically designed for lawn care enthusiasts and professionals seeking a reliable and efficient solution for maintaining their gardens and lawns. This robust machine is equipped with several cutting-edge features and technologies that enhance its performance and usability, making it a preferred choice for many.

One of the standout features of the Poulan SM30SB is its powerful engine. The model is typically powered by a 30cc two-stroke engine that delivers impressive torque and performance, allowing users to tackle a wide variety of lawn tasks. This high-performance engine ensures that users can efficiently manage different types of vegetation, from delicate weeds to tougher shrubs.

The design of the SM30SB emphasizes user comfort and control. It is equipped with an ergonomic handle that is adjustable to accommodate different users, providing a comfortable grip during operation. This design reduces fatigue during extended use, which can be particularly beneficial for those large mowing jobs. Additionally, the lightweight structure of the unit allows for easy maneuverability, enabling users to navigate around obstacles with ease.

Another key characteristic of the Poulan SM30SB is its advanced cutting technology. The model features a dual-line bump feed cutting head, which allows for quick and easy line replacement and ensures a clean and precise cut every time. This system increases efficiency, enabling the user to complete tasks more swiftly without sacrificing quality.

The SM30SB also incorporates fuel-efficient technologies that minimize fuel consumption while maximizing output. This not only has a positive environmental impact but also means users spend less on fuel while achieving outstanding results. Its easy-start feature eliminates the hassle of struggling with ignition, allowing users to get started on their tasks without delays.

Maintenance is often a concern for outdoor equipment, and the design of the Poulan SM30SB addresses this with its easy-access air filter and spark plug. Regular maintenance can be performed quickly, ensuring that the equipment remains in top condition and ready for use whenever needed.

In conclusion, the Poulan SM30SB, model numbers 115225426 and 966479401, is a versatile and efficient tool that combines power with user-friendly features. With its robust engine, ergonomic design, advanced cutting technology, and environmental considerations, it stands out as an excellent choice for anyone looking to maintain their outdoor space effectively.
Top Page Image Contents