Poulan SM30SB, 966479401 Assembly, Installing Trimmer ATTACH- Ment, Attaching the Shield

Page 9

ASSEMBLY

WARNING: If received assembled, repeat all steps to ensure your unit is properly assembled and all fasteners are secure.

Examine parts for damage. Do not use dam- aged parts.

NOTE: If you need assistance or find parts missing or damaged, call 1-800-554-6723.

It is normal for the fuel filter to rattle in the empty fuel tank.

Finding fuel or oil residue on muffler is normal due to carburetor adjustments and testing done by the manufacturer.

INSTALLING TRIMMER ATTACH- MENT

CAUTION: When installing trimmer attach- ment, place the unit on a flat surface for stabil- ity.

1.Loosen the coupler by turning the knob counterclockwise.

Coupler

Shipping

protectorLOOSEN

Knob

TIGHTEN

2.Remove shipping protector from coupler.

3.Remove the shaft cap from the trimmer at- tachment (if present).

4.Position locking/release button of attach- ment into guide recess of coupler.

5.Push the attachment into the coupler until the locking/release button snaps into the primary hole.

6.Before using the unit, tighten the knob se- curely by turning clockwise.

Coupler Primary Hole

Guide Recess

Locking/

Upper Release Attachment

Shaft Button

WARNING: Make sure the locking/ release button is locked in the primary hole and the knob is securely tightened before op- erating the unit. All attachments are designed to be used in the primary hole unless otherwise stated in the applicable attachment instruction manual. Using the wrong hole could lead to seri- ous injury or damage to the unit.

Locking/Release

Button in Primary Hole

For assembly of optional attachments (see list on page 11), refer to the ASSEMBLY sec- tion of the applicable attachment instruction manual.

ATTACHING THE SHIELD

WARNING: The shield must be prop- erly installed. The shield provides partial protec- tion from the risk of thrown objects to the opera- tor and others and is equipped with a line limiter blade which cuts excess line to the proper length. The line limiter blade (on underside of shield) is sharp and can cut you. For proper orientation of shield, see KNOW YOUR TRIM- MER illustration in OPERATION section.

1.Remove wing nut from shield.

2.Insert bracket into slot as shown.

3.Pivot shield until bolt passes through hole in bracket.

Bracket

Shield

Slot

4.Reinstall wing nut and tighten securely. WingNut

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Manual de Instrucciones Manuel d’Instructions Identification of Safety Symbols Table of ContentsIdentification of Safety Symbols Safety Rules Operator SafetyOptional Attachments Fuel Safety Unit / Maintenance SafetyLine Trimmer Safety Additional Safety RulesBLOWER/VACUUM Safety Edger SafetyBrushcutter Safety HandlebarHedge Trimmer Safety Cultivator SafetyPole Pruner Safety Cut from your right to your leftHigh speed causing injury Snow Thrower SafetyKnow how to stop quickly AnotherAssembly Installing Trimmer ATTACH- MentAttaching the Shield Operation HOW to Start Your Unit HOW to Stop Your UnitStarting a Cold Engine Starting a Warm EngineRemoving Trimmer ATTACH- Ment or Other Optional Attachments Installing Optional ATTACH- MentsOperating Position Remove the shaft cap from the attach- ment if presentCutting Methods Good clean jobTip of the line Does the cutting Work areaMaintenance Carburetor Idle Speed Adjustment Service and AdjustmentsReplacing the Line Replacing the Cutting HeadFuel System Seasonal StorageEngine OtherTroubleshooting Table Cause Remedy Statesville Road Limited WarrantyCanada, contact Ligations The U.S. EnvironmentalIntermediate 125 hours Extended 300 hours

115225426, 966479401, SM30SB specifications

The Poulan SM30SB is a notable addition to the range of outdoor power equipment, specifically designed for lawn care enthusiasts and professionals seeking a reliable and efficient solution for maintaining their gardens and lawns. This robust machine is equipped with several cutting-edge features and technologies that enhance its performance and usability, making it a preferred choice for many.

One of the standout features of the Poulan SM30SB is its powerful engine. The model is typically powered by a 30cc two-stroke engine that delivers impressive torque and performance, allowing users to tackle a wide variety of lawn tasks. This high-performance engine ensures that users can efficiently manage different types of vegetation, from delicate weeds to tougher shrubs.

The design of the SM30SB emphasizes user comfort and control. It is equipped with an ergonomic handle that is adjustable to accommodate different users, providing a comfortable grip during operation. This design reduces fatigue during extended use, which can be particularly beneficial for those large mowing jobs. Additionally, the lightweight structure of the unit allows for easy maneuverability, enabling users to navigate around obstacles with ease.

Another key characteristic of the Poulan SM30SB is its advanced cutting technology. The model features a dual-line bump feed cutting head, which allows for quick and easy line replacement and ensures a clean and precise cut every time. This system increases efficiency, enabling the user to complete tasks more swiftly without sacrificing quality.

The SM30SB also incorporates fuel-efficient technologies that minimize fuel consumption while maximizing output. This not only has a positive environmental impact but also means users spend less on fuel while achieving outstanding results. Its easy-start feature eliminates the hassle of struggling with ignition, allowing users to get started on their tasks without delays.

Maintenance is often a concern for outdoor equipment, and the design of the Poulan SM30SB addresses this with its easy-access air filter and spark plug. Regular maintenance can be performed quickly, ensuring that the equipment remains in top condition and ready for use whenever needed.

In conclusion, the Poulan SM30SB, model numbers 115225426 and 966479401, is a versatile and efficient tool that combines power with user-friendly features. With its robust engine, ergonomic design, advanced cutting technology, and environmental considerations, it stands out as an excellent choice for anyone looking to maintain their outdoor space effectively.
Top Page Image Contents