Poulan 115225426, SM30SB Unit / Maintenance Safety, Fuel Safety, Transporting and Storage

Page 5

SUse only for jobs explained in this manual (or manuals for optional attachments).

UNIT / MAINTENANCE SAFETY

SDisconnect the spark plug before performing

maintenance except carburetor adjustments.

SLook for and replace damaged or loose parts before each use. Look for and repair fuel

leaks before use. Keep in good working condition.

SReplace trimmer head parts that are chipped, cracked, broken, or damaged in any other

way before using the unit.

S Maintain unit according to recommended procedures. Keep cutting line at proper length.

S Use only 0.115 inch (3 mm) diameter Poulan PRO brand line. Never use wire, rope, string, etc.

SInstall required shield properly before using the unit. Use only specified trimmer head; make sure it is properly installed and securely

fastened.

S Make sure unit is assembled correctly as shown in this manual.

SMake carburetor adjustments with lower end

supported to prevent line from contacting any object.

SKeep others away when making carburetor adjustments.

S Use only recommended Poulan PRO accessories and replacement parts.

S Have all maintenance and service not explained in this manual performed by an authorized service dealer.

FUEL SAFETY

SMix and pour fuel outdoors.

SKeep away from sparks or flames. S Use a container approved for fuel.

S Do not smoke or allow smoking near fuel or the unit.

S Avoid spilling fuel or oil. Wipe up all fuel spills. S Move at least 10 feet (3 meters) away from

fueling site before starting engine.

S Stop engine and allow to cool before removing fuel cap.

S Always store gasoline in a container approved for flammable liquids.

TRANSPORTING AND STORAGE

S Allow engine to cool; secure unit before storing or transporting in vehicle.

S Empty the fuel tank before storing or transporting the unit. Use up fuel left in the carburetor by starting the engine and letting it run until it stops.

S Store unit and fuel in area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

S Store unit so line limiter blade cannot accidentally cause injury. The unit can be hung by the shaft.

S Store unit out of reach of children.

WARNING: The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

SAFETY NOTICE: Exposure to vibrations through prolonged use of gasoline powered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or abnor- mal swellings. Prolonged use in cold weather has been linked to blood vessel damage in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek medical attention. An

anti--vibration system does not guarantee the avoidance of these problems. Users who oper- ate power tools on a continual and regular basis must monitor closely their physical condition and the condition of this tool.

SPECIAL NOTICE: This unit is equipped with a temperature limiting muffler and spark ar- resting screen which meets the requirements of California Codes 4442 and 4443. All U.S. forest land and the states of California, Idaho, Maine, Minnesota, New Jersey, Oregon, and Washing- ton require by law that many internal combus- tion engines be equipped with a spark arresting screen. If you operate in a locale where such regulations exist, you are legally responsible for maintaining the operating condition of these parts. Failure to do so is a violation of the law. For normal homeowner use, the muffler and spark arresting screen will not require any ser- vice. After 50 hours of use, we recommend that your muffler be serviced or replaced by your au- thorized service dealer.

LINE TRIMMER SAFETY

WARNING: Inspect the area before each use. Remove objects (rocks, broken glass, nails, wire, etc.) which can be thrown by or become entangled in line. Hard objects can damage the trimmer head and be thrown causing serious injury.

S Keep others including children, animals, bystanders, and helpers at least 50 feet (15 meters) away. Bystanders should be encouraged to wear safety glasses. Stop engine immediately if you are approached.

S Use only for trimming, scalping, mowing and sweeping. Do not use for edging, pruning or hedge trimming.

SCut from your left to your right. Cutting on right side of the shield will throw debris away from the operator.

ADDITIONAL SAFETY RULES

FOR OPTIONAL ATTACHMENTS

WARNING: For each optional at- tachment used, read entire instruction manu- al before use and follow all warnings and in- structions in manual and on attachment.

WARNING: Ensure handlebar is installed when using brushcutter attach- ments. Attach handlebar above arrow on safety label on the upper shaft (engine end of unit). If your brushcutter attachment does not include a handlebar, a handlebar accessory kit (#530071451) is available from your au- thorized service dealer.

5

Image 5
Contents Manual de Instrucciones Manuel d’Instructions Identification of Safety Symbols Table of ContentsIdentification of Safety Symbols Optional Attachments Safety RulesOperator Safety Fuel Safety Unit / Maintenance SafetyLine Trimmer Safety Additional Safety RulesBLOWER/VACUUM Safety Edger SafetyBrushcutter Safety HandlebarHedge Trimmer Safety Cultivator SafetyPole Pruner Safety Cut from your right to your leftHigh speed causing injury Snow Thrower SafetyKnow how to stop quickly AnotherAttaching the Shield AssemblyInstalling Trimmer ATTACH- Ment Operation HOW to Start Your Unit HOW to Stop Your UnitStarting a Cold Engine Starting a Warm EngineRemoving Trimmer ATTACH- Ment or Other Optional Attachments Installing Optional ATTACH- MentsOperating Position Remove the shaft cap from the attach- ment if presentCutting Methods Good clean jobTip of the line Does the cutting Work areaMaintenance Carburetor Idle Speed Adjustment Service and AdjustmentsReplacing the Line Replacing the Cutting HeadFuel System Seasonal StorageEngine OtherTroubleshooting Table Cause Remedy Statesville Road Limited WarrantyCanada, contact Ligations The U.S. EnvironmentalIntermediate 125 hours Extended 300 hours

115225426, 966479401, SM30SB specifications

The Poulan SM30SB is a notable addition to the range of outdoor power equipment, specifically designed for lawn care enthusiasts and professionals seeking a reliable and efficient solution for maintaining their gardens and lawns. This robust machine is equipped with several cutting-edge features and technologies that enhance its performance and usability, making it a preferred choice for many.

One of the standout features of the Poulan SM30SB is its powerful engine. The model is typically powered by a 30cc two-stroke engine that delivers impressive torque and performance, allowing users to tackle a wide variety of lawn tasks. This high-performance engine ensures that users can efficiently manage different types of vegetation, from delicate weeds to tougher shrubs.

The design of the SM30SB emphasizes user comfort and control. It is equipped with an ergonomic handle that is adjustable to accommodate different users, providing a comfortable grip during operation. This design reduces fatigue during extended use, which can be particularly beneficial for those large mowing jobs. Additionally, the lightweight structure of the unit allows for easy maneuverability, enabling users to navigate around obstacles with ease.

Another key characteristic of the Poulan SM30SB is its advanced cutting technology. The model features a dual-line bump feed cutting head, which allows for quick and easy line replacement and ensures a clean and precise cut every time. This system increases efficiency, enabling the user to complete tasks more swiftly without sacrificing quality.

The SM30SB also incorporates fuel-efficient technologies that minimize fuel consumption while maximizing output. This not only has a positive environmental impact but also means users spend less on fuel while achieving outstanding results. Its easy-start feature eliminates the hassle of struggling with ignition, allowing users to get started on their tasks without delays.

Maintenance is often a concern for outdoor equipment, and the design of the Poulan SM30SB addresses this with its easy-access air filter and spark plug. Regular maintenance can be performed quickly, ensuring that the equipment remains in top condition and ready for use whenever needed.

In conclusion, the Poulan SM30SB, model numbers 115225426 and 966479401, is a versatile and efficient tool that combines power with user-friendly features. With its robust engine, ergonomic design, advanced cutting technology, and environmental considerations, it stands out as an excellent choice for anyone looking to maintain their outdoor space effectively.