Lexicon DC-2 owner manual Display Adjustment, Video On-Screen Display

Page 21

DC-2 Digital Controller

System Configuration

Depending on the location of the DC-2 in your room, you may need to adjust the contrast of the front panel display for optimum viewing. To adjust this display, press the ▲, ▼ or SELECT buttons on the Remote to enter the Main Menu. Press ▼ twice to select DISPLAY ADJUST.

Press SELECT to highlight the Display Adjust Menu. Press ▼ to select

FRONT PANEL DISPLAY.

DISPLAY ADJUST MENU

ON-SCREEN DISPLAY

FRONT PANEL DISPLAY

Display Adjustment

MAIN MENU

EFFECT ADJUST

EQUALIZATION

DISPLAY ADJUST

SETUP

To adjust contrast, use SELECT to highlight CONTRAST ADJUSTMENT, and ▲ or ▼ to set the contrast of the display to its maximum as seen from your listening position. Press DONE twice to return to the main menu.

 

FRONT PANEL DISPLAY

 

Adjust with ▲ or ▼

 

 

 

 

 

STATUS ALWAYS ON

 

 

 

ALWAYS ON, 2 SECONDS, ALWAYS OFF

CONTRAST ADJUSTMENT

 

 

1-16

 

 

 

 

 

 

 

f you want to turn the front panel display off, use SELECT to highlight STATUS, then use ▲ or ▼ to select ALWAYS OFF. With software Version 4, you can select 2 SECONDS which will cause the display to shut off automatically two seconds after a command is received.

Press DONE twice to return to the main menu.

In addition to the front-panel display, the DC-2 contains a character genera- tor for a video overlay display on monitors. Since the on-screen display is capable of showing the full menu of options available at any point, calibra- tion of the system is faster and easier if the DC-2 video output is connected to a video monitor.

Adjustments to the on-screen display are made from the Display Adjust menu. To display this menu, press the ▲, ▼ or SELECT buttons on the Remote to enter the Main Menu. Press ▼ twice to select DISPLAY ADJUST.

Press SELECT to enter the Display Adjust menu. Press SELECT to open the On-Screen Display menu.

The Video On-Screen Display

MAIN MENU

EFFECT ADJUST

EQUALIZATION

DISPLAY ADJUST

SETUP

13

Page 20 Page 22
Image 21
Page 20 Page 22
Contents DC-2 Important Safety Instructions Communications NoticeAcknowledgements Vigtig information om sikkerhed Wichtige Sicherheitsanweisungen Contents Specifications Installation Worksheet TroubleshootingPCM Effects and Parameters AC-3 Effects and ParametersIntroduction Glossary of Terms Using the DocumentationPage Front Panel Controls IndicatorsRear Panel InstallationRemote Control InstallationFunctions Using the Shift Alternate Remote ControlPress and hold with buttons shown to access these remote Record/Zone 2 buttonsPress and hold with Location Considerations AC Connections ConnectionWire Lengths AWG Size Wiring ConsiderationsAudio/Video Connections Audio/Video CablesVideo Disc Player AC-3 RF Digital Audio Connections Video ConnectionsAC-3 Ready Laser Disc LD/DVD PlayersAdjust with or Restore Factory DefaultsEqualization +0.0dBLoudness TiltVideo On-Screen Display Display AdjustmentDisplay Adjust Menu ON-SCREEN Display Input Configuration Input GainAnalog Inputs Only Input Level Meters Restore Input NameInput Name Input Effect FX AssignmentAC-3 FX AutomaticSystem Configuration DTS Only PCM Only AC-3 OnlyVideo Coax 1-5Digital Audio Inputs Record/Zone 2 Controls Record/ZoneOFF Custom Configuration Speaker ConfigurationPGM Trigger Assignment Front L/RSides Rears CenterTHX Configuration Setting Output LevelsConfiguration Subwoofer OutputOutput Levels Menu Limiter Subwoofer Peak LimiterSpeaker Distance Mute Level Power On Volume Zone 2 Power On VolumeSync Delay Calibrate Panorama OFF Sync DLY Balance Zone 2 Balance Assign Custom Name Locking SettingsUsing DC-2 Effects Comparing a modified Effect to the factory preset versionCustomizing Effects Listening to only the DC-2 Effect Front/Back Fader Restoring the original parameter values of an EffectNightclub PanoramaPCM Effects and Parameters Party ChannelMusic Surround Logic Music LogicPro Logic TV MatrixDialog in the center Mono LogicPCM Effects and Parameters PCM Effects and Parameters PCM Effects and Parameters PCM Effects and Parameters AC-3 Status Display Data Rate 384 kb/sec4dB Music AC-3 Effects and ParametersDolby Digital Including Surround EX THXAC-3 Effects and Parameters AC-3 Effects and Parameters DTS Music DTS 2-ChannelDTS Film DTS LogicDTS Effect Parameters DTS THXDTS Effects and Parameters Problem Possible Cause and Solution TroubleshootingTroubleshooting Exit Routine Maintenance Restoring DefaultsSpecifications Inputs Speaker Configuration circle selection

DC-2 specifications

The Lexicon DC-2 is a renowned digital surround sound processor that has garnered appreciation for its advanced technology and superior audio performance. Designed specifically for home theater systems and high-end audio setups, the DC-2 is a versatile unit that can provide high-quality sound reproduction in a variety of environments.

One of the standout features of the Lexicon DC-2 is its dual DSP architecture. This advanced processing technology enables the processor to handle complex audio formats with ease, delivering immersive soundscapes for both music and movies. The DC-2 supports formats such as Dolby Digital, DTS, and other surround sound technologies, ensuring compatibility with a wide range of media sources.

Another key characteristic of the DC-2 is its extensive connectivity options. It is equipped with multiple inputs and outputs, including analog and digital connections, which allow for seamless integration with various audio and video components. This flexibility makes it an ideal choice for those seeking to create a custom audio setup tailored to their specific needs.

The Lexicon DC-2 also features sophisticated room correction capabilities. Using the proprietary Lexicon Room Correction (LRC) technology, it analyzes the acoustic characteristics of your listening space and adjusts the audio output accordingly. This ensures optimal sound quality regardless of the room's shape or size, enhancing the overall listening experience.

Moreover, its user-friendly interface and remote control functionality offer intuitive operation, making it easy for users to navigate through different settings and modes. The LCD screen displays vital information, allowing for quick adjustments on the fly.

In terms of audio quality, the DC-2 is known for its pristine sound clarity and dynamic range. With a robust signal-to-noise ratio, it minimizes distortion and delivers a clean, accurate audio signal. Audiophiles appreciate the fidelity with which it reproduces music, bringing studio-quality sound to the home environment.

In summary, the Lexicon DC-2 is a powerful digital surround sound processor that combines advanced technologies and innovative features to provide a premier audio experience. Suitable for both casual listeners and serious audiophiles, it stands as a testament to Lexicon’s dedication to audio excellence. Its versatility, connectivity, room correction, and exceptional sound quality make the DC-2 an outstanding choice for any modern home theater system.
Top Page Image Contents