Lexicon owner manual Using DC-2 Effects, Customizing Effects

Page 41

DC-2 Digital Controller

System Configuration

When EFFECT ADJUST is selected from the Main menu, the on-screen display shows a list of parameters specific to the current effect, as well as the current value of each parameter. (The front panel display shows one parameter at a time). Use the ▲ and ▼ buttons to move through the displayed list. Press SELECT to activate a two-line display which allows you to use ▲ and ▼ to alter the selected parameterÕs value. Press DONE to confirm the change and move on to the next menu item. Each DC-2 Effect and its parameter menu is described in the following sections.

Although the list of available parameters will vary with different effects, the last item in each menu is always CUSTOM. Selecting CUSTOM calls up a sub-menu which allows you to name your custom effects, to compare your version with the original preset, or to restore the preset versions of the Effect name and parameter values.

When first shipped, the DC-2 has a set of default values assigned to each Effect. These values have been determined to be suitable for initial listening. As every installation has its own unique characteristics, and listeners have distinctly different preferences, you may want to tailor the Effects to suit your own requirements. To allow easy cutomization, any parameter changes you make take effect instantly, and automatically become part of the Effect. You can even change the name that appears on-screen. Once you have made the changes you want, the Effect will remain as you have set it unless you alter it again, or deliberately restore the factory preset parameter values.

Selecting CUSTOM from any Effect Adjust menu will give you access to the controls listed to the side and described below. Use ▲ and ▼ to highlight any menu item, then press SELECT to open the submenu.

LISTEN CUSTOM/PRESET lets you compare your edited version of an Effect with the original version as set at the factory. When this control is selected, ▲ and ▼ allow you to alternate between the "preset" and your modified version ("custom"). The display will confirm whether you are LISTENING TO CUSTOM or PRESET.

Note that this function is available, even if you have not made any changes to an Effect. Until you make parameter changes to create a custom version of a preset, the LISTEN TO CUSTOM option will contain an exact duplicate of the preset Effect.

Exiting this menu restores the CUSTOM version.

Using DC-2 Effects

MAIN MENU

EFFECT ADJUST

EQUALIZATION

DISPLAY ADJUST

SETUP

Customizing Effects

CUSTOM MENU

LISTEN CUSTOM/PRESET RESTORE PARAMETERS EDIT EFFECT NAME RESTORE EFFECT NAME

EFFECT ONLY OFF FRONT/BACK FADER < >

Comparing a modified Effect to the factory preset version

33

Page 40 Page 42
Image 41
Page 40 Page 42
Contents DC-2 Acknowledgements Important Safety InstructionsCommunications Notice Vigtig information om sikkerhed Wichtige Sicherheitsanweisungen Contents Specifications Installation Worksheet TroubleshootingPCM Effects and Parameters AC-3 Effects and ParametersIntroduction Glossary of Terms Using the DocumentationPage Front Panel Controls IndicatorsRear Panel InstallationRemote Control InstallationFunctions Using the Shift Alternate Remote ControlPress and hold with buttons shown to access these remote Record/Zone 2 buttonsPress and hold with Location Considerations AC Connections ConnectionWire Lengths AWG Size Wiring ConsiderationsAudio/Video Connections Audio/Video CablesVideo Disc Player AC-3 RF Digital Audio Connections Video ConnectionsAC-3 Ready Laser Disc LD/DVD PlayersAdjust with or Restore Factory DefaultsEqualization +0.0dBLoudness TiltVideo On-Screen Display Display AdjustmentDisplay Adjust Menu ON-SCREEN Display Analog Inputs Only Input ConfigurationInput Gain Input Level Meters Restore Input NameInput Name Input Effect FX AssignmentAC-3 FX AutomaticSystem Configuration DTS Only PCM Only AC-3 OnlyDigital Audio Inputs VideoCoax 1-5 Record/Zone 2 Controls Record/ZoneOFF Custom Configuration Speaker ConfigurationPGM Trigger Assignment Front L/RSides Rears CenterTHX Configuration Setting Output LevelsConfiguration Subwoofer OutputOutput Levels Menu Limiter Subwoofer Peak LimiterSpeaker Distance Mute Level Power On Volume Zone 2 Power On VolumeSync Delay Calibrate Panorama OFF Sync DLY Balance Zone 2 Balance Assign Custom Name Locking SettingsCustomizing Effects Using DC-2 EffectsComparing a modified Effect to the factory preset version Listening to only the DC-2 Effect Front/Back Fader Restoring the original parameter values of an EffectNightclub PanoramaPCM Effects and Parameters Music Surround PartyChannel Logic Music LogicPro Logic TV MatrixDialog in the center Mono LogicPCM Effects and Parameters PCM Effects and Parameters PCM Effects and Parameters PCM Effects and Parameters 4dB AC-3 Status DisplayData Rate 384 kb/sec Music AC-3 Effects and ParametersDolby Digital Including Surround EX THXAC-3 Effects and Parameters AC-3 Effects and Parameters DTS Music DTS 2-ChannelDTS Film DTS LogicDTS Effect Parameters DTS THXDTS Effects and Parameters Problem Possible Cause and Solution TroubleshootingTroubleshooting Exit Routine Maintenance Restoring DefaultsSpecifications Inputs Speaker Configuration circle selection

DC-2 specifications

The Lexicon DC-2 is a renowned digital surround sound processor that has garnered appreciation for its advanced technology and superior audio performance. Designed specifically for home theater systems and high-end audio setups, the DC-2 is a versatile unit that can provide high-quality sound reproduction in a variety of environments.

One of the standout features of the Lexicon DC-2 is its dual DSP architecture. This advanced processing technology enables the processor to handle complex audio formats with ease, delivering immersive soundscapes for both music and movies. The DC-2 supports formats such as Dolby Digital, DTS, and other surround sound technologies, ensuring compatibility with a wide range of media sources.

Another key characteristic of the DC-2 is its extensive connectivity options. It is equipped with multiple inputs and outputs, including analog and digital connections, which allow for seamless integration with various audio and video components. This flexibility makes it an ideal choice for those seeking to create a custom audio setup tailored to their specific needs.

The Lexicon DC-2 also features sophisticated room correction capabilities. Using the proprietary Lexicon Room Correction (LRC) technology, it analyzes the acoustic characteristics of your listening space and adjusts the audio output accordingly. This ensures optimal sound quality regardless of the room's shape or size, enhancing the overall listening experience.

Moreover, its user-friendly interface and remote control functionality offer intuitive operation, making it easy for users to navigate through different settings and modes. The LCD screen displays vital information, allowing for quick adjustments on the fly.

In terms of audio quality, the DC-2 is known for its pristine sound clarity and dynamic range. With a robust signal-to-noise ratio, it minimizes distortion and delivers a clean, accurate audio signal. Audiophiles appreciate the fidelity with which it reproduces music, bringing studio-quality sound to the home environment.

In summary, the Lexicon DC-2 is a powerful digital surround sound processor that combines advanced technologies and innovative features to provide a premier audio experience. Suitable for both casual listeners and serious audiophiles, it stands as a testament to Lexicon’s dedication to audio excellence. Its versatility, connectivity, room correction, and exceptional sound quality make the DC-2 an outstanding choice for any modern home theater system.
Top Page Image Contents