Poulan 530164256 Check for Loose Fasteners and Parts, Check for Damaged or Worn Parts

Page 15

SDirect material discharge away from glass enclosures, automobiles, etc.

SDo not run engine at high speed while not removing snow.

S Be attentive when using the snowthrower, and stay alert for holes in the terrain and other hidden hazards.

S Make sure the rotor will spin freely before attaching the snowthrower to the powerhead.

SIf the rotor will not rotate freely due to frozen ice, thaw the unit before thoroughly before attempting to operate under power.

SKeep the rotor clear of debris.

SDo not throw snow near other people. The snow thrower could propel small objects at

high speed causing injury.

S After striking a foreign object, stop the engine, disconnect spark plug and inspect the snowthrower for damage and repair if necessary before restarting unit.

SNever operate the snowthrower near glass enclosures, automobiles and trucks.

SNever attempt to use the snowthrower on a roof.

S Never operate the snowthrower near window wells, dropoffs, etc.

SNever discharge snow onto public roads or

near moving traffic.

SClear snow from slopes by going up and down; never across. Use caution when changing directions. Never clear snow from steep slopes.

SLet snowthrower run for a few minutes after clearing snow so moving parts do not freeze.

SLook behind and use care when backing up. Exercise caution to avoid slipping or falling,

especially when operating in reverse.

SKnow how to stop quickly.

WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments.

HELPFUL TIP

IMPORTANT: Have all

repairs other than the rec- ommended maintenance described in the instruction manual performed by an authorized service dealer.

If any dealer other than an authorized service dealer performs work on the product, Electrolux Home Products, Inc., may not pay for repairs under war- ranty. It is your responsibility to maintain and perform general maintenance.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws

S Assist Handle Screw S Debris Shield

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

SON/OFF Switch -- Ensure ON/OFF switch

functions properly by moving the switch to the OFF position. Make sure engine stops; then restart engine and continue.

SFuel Tank -- Discontinue use of unit if fuel

tank shows signs of damage or leaks.

SDebris Shield -- Discontinue use of unit if debris shield is damaged.

INSPECT AND CLEAN UNIT AND DE- CALS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and decals using a damp cloth with a mild deter- gent.

SWipe off unit with a clean dry cloth.

CLEAN AIR FILTER

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean after every 5 hours of operation.

1. Clean the cover and the area around it to keep dirt from falling into the carburetor chamber when the cover is removed.

2. Remove parts by pressing button to re- lease air filter cover.

NOTE: To avoid creating a fire hazard or producing harmful evaporative emissions, do not clean filter in gasoline or other flammable solvent.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Replace parts.

Button

Air Filter

 

Air Filter

Cover

INSPECT MUFFLER AND SPARK ARRESTING SCREEN

WARNING: The muffler on this prod- uct contains chemicals known to the State of California to cause cancer.

As your unit is used, carbon deposits build up on the muffler and spark arresting screen and must be removed to avoid creating a fire haz- ard or affecting engine performance.

For normal homeowner use, the muffler and spark arresting screen will not require any service. After 50 hours of use, we recom- mend that your muffler be serviced or re- placed by an authorized service dealer.

15

Image 15
Contents 11/04 530164256Always Wear Operator SafetyTransporting and Storage UNIT/MAINTENANCE SafetyFuel Safety Cutting SafetyAttaching the Handlebar Carton ContentsInstalling Brushcutter Attachment Tools RequiredTo Relocate Shoulder Strap Clamp Assembly of Shoulder StrapConfiguring Your Unit Assembly Information -- Trimmer HeadWeed Blade Assembly Information -- Weed BladeAttaching the Plastic Shield and Trimmer Head Attaching the Metal ShieldInstallation of the Metal Blade Primer Bulb ON/OFF Switch ChokeHOW to Stop Your Unit Know Your UnitStarting a Flooded Engine HOW to Start Your UnitSwitch Throttle Trigger Starting a Warm EngineOperating Position Installing Optional ATTACH- MentsOperating the Coupler Removing Trimmer ATTACH- Ment or Other Optional AttachmentsCutting Methods Trimmer Line AdvanceRecommended Cutting Position Operating Instructions forUSE with Weed Blade What Causes Blade Thrust --BladeHedge Trimmer Safety Edger SafetyBLOWER/VACUUM Safety Cultivator SafetySnow Thrower Safety Pole Pruner SafetyCheck for Damaged or Worn Parts Inspect and Clean Unit and DE- CalsClean AIR Filter Check for Loose Fasteners and PartsReplacing the Line Blade ReplacementCarburetor Adjustment Replace Spark PlugOther Seasonal StorageFuel System EngineTroubleshooting Table Cause Remedy Electrolux Home PRODUCTS, INC Home PRODUCTS, INC., for this tool. AddiPolicy of Electrolux Home Prod Ligations The U.S. EnvironmentalOn or Modified Parts The use of add Under warranty. What is not Covered

530164256 specifications

The Poulan 530164256 is a high-performance gas chainsaw that stands out for both its reliability and efficiency, making it an excellent choice for homeowners and professionals alike. This powerful tool is designed to handle a wide range of tasks, from cutting firewood to clearing fallen trees, providing users with a robust solution for their outdoor projects.

At the heart of the Poulan 530164256 is its efficient engine. The chainsaw is equipped with a potent 42cc two-stroke engine that delivers ample power for demanding applications. This engine utilizes a lightweight design, which contributes to the overall balance of the chainsaw, enabling easy maneuverability without sacrificing performance.

One of the standout features of the Poulan 530164256 is its OxyPower technology. This innovative technology helps to increase fuel efficiency while reducing emissions, making the chainsaw more environmentally friendly. With this feature, users can enjoy longer run times and extended cutting capabilities, all while minimizing their carbon footprint.

The chainsaw also incorporates a simple starting system, which reduces the frustration often associated with starting gas-powered tools. This user-friendly ignition system ensures that users can quickly and easily fire up the chainsaw, whether they're in a hurry or dealing with cold weather conditions.

Additionally, the Poulan 530164256 features an automatic chain lubrication system. This system ensures that the chain is consistently lubricated during operation, which not only extends the lifespan of the chain and bar but also enhances cutting performance. This feature reduces the need for frequent maintenance checks, allowing users to focus on their tasks.

The chainsaw is designed with comfort in mind. It is equipped with an ergonomic handle that provides a secure grip, reducing fatigue during extended use. The anti-vibration technology further enhances user comfort by minimizing vibrations transmitted through the tool, leading to a more enjoyable cutting experience.

Overall, the Poulan 530164256 combines power, efficiency, and user-friendly features, making it an invaluable tool for anyone in need of a reliable chainsaw. Its advanced technology and thoughtful design elements make it an ideal choice for a variety of cutting tasks, ensuring that users can tackle their outdoor projects with confidence and ease.