Poulan 530164256 instruction manual Pole Pruner Safety, Snow Thrower Safety

Page 14

Blades move

 

Allow blades to stop

 

momentarily

 

before removing

after the

 

them from the cut.

trigger is

 

 

released.

 

 

 

 

 

WARNING: Inspect the area before starting the unit. Remove all debris and hard objects such as rocks, glass, wire, etc. that can ricochet, be thrown, or otherwise cause injury or damage during operation.

S Do not use a cutting blade that is bent, warped, cracked, broken or damaged in any other way. Have worn or damaged parts replaced by an authorized service dealer.

S Always keep unit in front of your body. Keep all parts of your body away from the cutting blade.

SKeep the cutting blade and air vents clear of debris.

POLE PRUNER SAFETY

WARNING: The reciprocating blade/ rotating chain can cause severe injury. In- spect the unit before use. Do not operateunit with a bent, cracked or dull blade or dull chain. Keep away from the blade/chain.

WARNING: The reciprocating blade/ rotating chain is sharp. Do not touch. To pre- vent serious injury, always stop engine and ensure blade/chain has stopped moving, dis- connect spark plug, and wear gloves when changing or handling the blade or chain.

WARNING: A coasting blade/rotat- ing chain can cause injury while it continues to move after the engine is stopped. Maintain proper control of the unit until the blade/chain has completely stopped moving. Keep hands, face and feet at a distance from all moving parts. Do not attempt to touch or stop the blade or chain when it is moving.

WARNING: Falling objects can cause severe head injury. Wear head protec- tion when operating this unit with a pole prun- er attachment.

WARNING: To prevent serious injury, do not use more than one boom extension with a pole pruner attachment.

WARNING: Keep the pruner away from power lines or electrical wires.

SOnly use for pruning limbs or branches up

to 4 inches (10 cm) in diameter.

S Do not operate the unit faster than the speed needed to prune. Do not run the unit at high speed when not pruning.

SAlways stop the unit when work is delayed or when walking from one cutting location to another.

S If you strike or become entangled with a foreign object, stop the engine immediately and check for damage. Have any damage repaired by an authorized service dealer before attempting further operations. Discard blades that are bent, warped, cracked or broken.

SStop the unit immediately if you feel excessive vibration. Vibration is a sign of trouble. Inspect thoroughly for loose nuts, bolts or damage before continuing. Contact an authorized service dealer for repair or replacement of affected parts as necessary.

SNOW THROWER SAFETY

WARNING: Keep hands and feet away from the rotor when starting or running the engine. Never attempt to clear the rotor with the engine/motor running. Stop engine and disconnect spark plug before unclogging snow or debris from discharge chute or when adjusting vanes.

WARNING: Never lean over dis- charge chute. Rocks or debris could be thrown into the eyes and face and cause seri- ous injury or blindness.

WARNING: Inspect the area where the unit is to be used. Remove objects that could be thrown or damage the unit. Some objects may be hidden by fallen snow -- be alert for the possibility.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents 530164256 11/04Operator Safety Always WearCutting Safety UNIT/MAINTENANCE SafetyFuel Safety Transporting and StorageTools Required Carton ContentsInstalling Brushcutter Attachment Attaching the HandlebarAssembly Information -- Trimmer Head Assembly of Shoulder StrapConfiguring Your Unit To Relocate Shoulder Strap ClampAttaching the Metal Shield Assembly Information -- Weed BladeAttaching the Plastic Shield and Trimmer Head Weed BladeInstallation of the Metal Blade Know Your Unit ON/OFF Switch ChokeHOW to Stop Your Unit Primer BulbStarting a Warm Engine HOW to Start Your UnitSwitch Throttle Trigger Starting a Flooded EngineRemoving Trimmer ATTACH- Ment or Other Optional Attachments Installing Optional ATTACH- MentsOperating the Coupler Operating PositionTrimmer Line Advance Cutting MethodsWhat Causes Blade Thrust --Blade Operating Instructions forUSE with Weed Blade Recommended Cutting PositionCultivator Safety Edger SafetyBLOWER/VACUUM Safety Hedge Trimmer SafetyPole Pruner Safety Snow Thrower SafetyCheck for Loose Fasteners and Parts Inspect and Clean Unit and DE- CalsClean AIR Filter Check for Damaged or Worn PartsReplace Spark Plug Blade ReplacementCarburetor Adjustment Replacing the LineEngine Seasonal StorageFuel System OtherTroubleshooting Table Cause Remedy Ligations The U.S. Environmental Home PRODUCTS, INC., for this tool. AddiPolicy of Electrolux Home Prod Electrolux Home PRODUCTS, INCUnder warranty. What is not Covered On or Modified Parts The use of add

530164256 specifications

The Poulan 530164256 is a high-performance gas chainsaw that stands out for both its reliability and efficiency, making it an excellent choice for homeowners and professionals alike. This powerful tool is designed to handle a wide range of tasks, from cutting firewood to clearing fallen trees, providing users with a robust solution for their outdoor projects.

At the heart of the Poulan 530164256 is its efficient engine. The chainsaw is equipped with a potent 42cc two-stroke engine that delivers ample power for demanding applications. This engine utilizes a lightweight design, which contributes to the overall balance of the chainsaw, enabling easy maneuverability without sacrificing performance.

One of the standout features of the Poulan 530164256 is its OxyPower technology. This innovative technology helps to increase fuel efficiency while reducing emissions, making the chainsaw more environmentally friendly. With this feature, users can enjoy longer run times and extended cutting capabilities, all while minimizing their carbon footprint.

The chainsaw also incorporates a simple starting system, which reduces the frustration often associated with starting gas-powered tools. This user-friendly ignition system ensures that users can quickly and easily fire up the chainsaw, whether they're in a hurry or dealing with cold weather conditions.

Additionally, the Poulan 530164256 features an automatic chain lubrication system. This system ensures that the chain is consistently lubricated during operation, which not only extends the lifespan of the chain and bar but also enhances cutting performance. This feature reduces the need for frequent maintenance checks, allowing users to focus on their tasks.

The chainsaw is designed with comfort in mind. It is equipped with an ergonomic handle that provides a secure grip, reducing fatigue during extended use. The anti-vibration technology further enhances user comfort by minimizing vibrations transmitted through the tool, leading to a more enjoyable cutting experience.

Overall, the Poulan 530164256 combines power, efficiency, and user-friendly features, making it an invaluable tool for anyone in need of a reliable chainsaw. Its advanced technology and thoughtful design elements make it an ideal choice for a variety of cutting tasks, ensuring that users can tackle their outdoor projects with confidence and ease.
Top Page Image Contents