Poulan 530164256 instruction manual Installation of the Metal Blade

Page 7

INSTALLATION OF THE METAL BLADE

WARNING: Wear protective gloves when handling or performing maintenance on the blade to avoid injury. The blade is sharp and can cut you even when it is not moving.

WARNING: Do not use any blades, or fastening hardware other than the washers and nuts shown in the following illustrations. These parts must be provided by Poulan/Weed Eater and installed as shown below. Failure to use proper parts can cause the blade to fly off and seriously hurt you or others.

NOTE: The dust cup and retaining washer are located on the gearbox shaft and not in the parts bag. All other fasteners mentioned in the follow- ing assembly steps are in the parts bag.

1.Remove the retaining washer from the threaded shaft of the gearbox. Leave the dust cup on the shaft.

2.Install the blade and the retaining washer over the threaded shaft.

3.Make sure the raised part of the retaining washer is facing the gearbox and the raised area fits into the hole in the center of the blade.

4.Slide the blade and retaining washer onto the shaft of the gearbox.

5.Place the cupped washer onto the shaft. Make sure the cupped side of the washer is toward the blade.

6.Install the blade nut by threading onto the shaft counterclockwise.

Gearbox

Shield

NOTE: Make sure all parts are in place as il- lustrated, and the blade is sandwiched between the dust cup and the retaining washer. There should be no space between the blade and the dust cup or the retaining washer.

7.Align hole in dust cup with hole in side of gearbox by rotating the blade.

8.Insert a small screwdriver into aligned holes. This will keep the shaft from turn- ing while tightening the blade nut.

Screwdriver

9.TIghten blade nut firmly with a wrench while holding screwdriver in position.

10.Remove the screwdriver.

11.Turn blade by hand. If the blade binds against the shield, or appears to be uneven, the blade is not centered, and you must re- install.

NOTE: To remove blade, insert screwdriver into aligned holes. Unthread the nut and re- move parts. Be sure to store parts and instruc- tions for future use.

Dust Cup

Threaded Shaft

RetainingBlade

Washer

Cupped

Washer

Nut

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 11/04 530164256Always Wear Operator SafetyTransporting and Storage UNIT/MAINTENANCE SafetyFuel Safety Cutting SafetyAttaching the Handlebar Carton ContentsInstalling Brushcutter Attachment Tools RequiredTo Relocate Shoulder Strap Clamp Assembly of Shoulder StrapConfiguring Your Unit Assembly Information -- Trimmer HeadWeed Blade Assembly Information -- Weed BladeAttaching the Plastic Shield and Trimmer Head Attaching the Metal ShieldInstallation of the Metal Blade Primer Bulb ON/OFF Switch ChokeHOW to Stop Your Unit Know Your UnitStarting a Flooded Engine HOW to Start Your UnitSwitch Throttle Trigger Starting a Warm EngineOperating Position Installing Optional ATTACH- MentsOperating the Coupler Removing Trimmer ATTACH- Ment or Other Optional AttachmentsCutting Methods Trimmer Line AdvanceRecommended Cutting Position Operating Instructions forUSE with Weed Blade What Causes Blade Thrust --BladeHedge Trimmer Safety Edger SafetyBLOWER/VACUUM Safety Cultivator SafetySnow Thrower Safety Pole Pruner SafetyCheck for Damaged or Worn Parts Inspect and Clean Unit and DE- CalsClean AIR Filter Check for Loose Fasteners and PartsReplacing the Line Blade ReplacementCarburetor Adjustment Replace Spark PlugOther Seasonal StorageFuel System EngineTroubleshooting Table Cause Remedy Electrolux Home PRODUCTS, INC Home PRODUCTS, INC., for this tool. AddiPolicy of Electrolux Home Prod Ligations The U.S. EnvironmentalOn or Modified Parts The use of add Under warranty. What is not Covered

530164256 specifications

The Poulan 530164256 is a high-performance gas chainsaw that stands out for both its reliability and efficiency, making it an excellent choice for homeowners and professionals alike. This powerful tool is designed to handle a wide range of tasks, from cutting firewood to clearing fallen trees, providing users with a robust solution for their outdoor projects.

At the heart of the Poulan 530164256 is its efficient engine. The chainsaw is equipped with a potent 42cc two-stroke engine that delivers ample power for demanding applications. This engine utilizes a lightweight design, which contributes to the overall balance of the chainsaw, enabling easy maneuverability without sacrificing performance.

One of the standout features of the Poulan 530164256 is its OxyPower technology. This innovative technology helps to increase fuel efficiency while reducing emissions, making the chainsaw more environmentally friendly. With this feature, users can enjoy longer run times and extended cutting capabilities, all while minimizing their carbon footprint.

The chainsaw also incorporates a simple starting system, which reduces the frustration often associated with starting gas-powered tools. This user-friendly ignition system ensures that users can quickly and easily fire up the chainsaw, whether they're in a hurry or dealing with cold weather conditions.

Additionally, the Poulan 530164256 features an automatic chain lubrication system. This system ensures that the chain is consistently lubricated during operation, which not only extends the lifespan of the chain and bar but also enhances cutting performance. This feature reduces the need for frequent maintenance checks, allowing users to focus on their tasks.

The chainsaw is designed with comfort in mind. It is equipped with an ergonomic handle that provides a secure grip, reducing fatigue during extended use. The anti-vibration technology further enhances user comfort by minimizing vibrations transmitted through the tool, leading to a more enjoyable cutting experience.

Overall, the Poulan 530164256 combines power, efficiency, and user-friendly features, making it an invaluable tool for anyone in need of a reliable chainsaw. Its advanced technology and thoughtful design elements make it an ideal choice for a variety of cutting tasks, ensuring that users can tackle their outdoor projects with confidence and ease.
Top Page Image Contents