Poulan 115248826, 952711944 Unit / Maintenance Safety, Fuel Safety, Transporting and Storage

Page 5

SUse only in daylight or good artificial light. S Use only for jobs explained in this manual (or manuals for optional attachments).

UNIT / MAINTENANCE SAFETY

S Disconnect the spark plug before performing maintenance except carburetor adjustments.

S Look for and replace damaged or loose parts before each use. Look for and repair fuel leaks before use. Keep in good working condition.

S Replace trimmer head parts that are chipped, cracked, broken, or damaged in any other way before using the unit.

S Maintain unit according to recommended procedures. Keep cutting line at proper length.

S Use only 0.115 inch (3 mm) diameter Poulan PRO brand line. Never use wire, rope, string, etc.

S Install required shield properly before using the unit. Use only specified trimmer head; make sure it is properly installed and securely fastened.

S Make sure unit is assembled correctly as shown in this manual.

S Make carburetor adjustments with lower end supported to prevent line from contacting any object.

S Keep others away when making carburetor adjustments.

S Use only recommended Poulan PRO accessories and replacement parts.

S Have all maintenance and service not explained in this manual performed by an authorized service dealer.

FUEL SAFETY

S Mix and pour fuel outdoors.

S Keep away from sparks or flames. S Use a container approved for fuel.

S Do not smoke or allow smoking near fuel or the unit.

S Avoid spilling fuel or oil. Wipe up all fuel spills. S Move at least 10 feet (3 meters) away from

fueling site before starting engine.

S Stop engine and allow to cool before removing fuel cap.

S Always store gasoline in a container approved for flammable liquids.

TRANSPORTING AND STORAGE

S Allow engine to cool; secure unit before storing or transporting in vehicle.

S Empty the fuel tank before storing or transporting the unit. Use up fuel left in the carburetor by starting the engine and letting it run until it stops.

S Store unit and fuel in area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

S Store unit so line limiter blade cannot accidentally cause injury. The unit can be hung by the shaft.

S Store unit out of reach of children.

WARNING: The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

SAFETY NOTICE: Exposure to vibrations through prolonged use of gasoline powered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or abnor- mal swellings. Prolonged use in cold weather has been linked to blood vessel damage in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek medical attention. An

anti--vibration system does not guarantee the avoidance of these problems. Users who oper- ate power tools on a continual and regular basis must monitor closely their physical condition and the condition of this tool.

SPECIAL NOTICE: This unit is equipped with a temperature limiting muffler and spark ar- resting screen which meets the requirements of California Codes 4442 and 4443. All U.S. forest land and the states of California, Idaho, Maine, Minnesota, New Jersey, Oregon, and Washing- ton require by law that many internal combus- tion engines be equipped with a spark arresting screen. If you operate in a locale where such regulations exist, you are legally responsible for maintaining the operating condition of these parts. Failure to do so is a violation of the law. For normal homeowner use, the muffler and spark arresting screen will not require any ser- vice. After 50 hours of use, we recommend that your muffler be serviced or replaced by your au- thorized service dealer.

LINE TRIMMER SAFETY

WARNING: Inspect the area before each use. Remove objects (rocks, broken glass, nails, wire, etc.) which can be thrown by or become entangled in line. Hard objects can damage the trimmer head and be thrown causing serious injury.

S Keep others including children, animals, bystanders, and helpers at least 50 feet (15 meters) away. Bystanders should be encouraged to wear safety glasses. Stop engine immediately if you are approached.

S Use only for trimming, scalping, mowing and sweeping. Do not use for edging, pruning or hedge trimming.

SCut from your left to your right. Cutting on right side of the shield will throw debris away from the operator.

ADDITIONAL SAFETY RULES

FOR OPTIONAL ATTACHMENTS

WARNING: For each optional at- tachment used, read entire instruction manu- al before use and follow all warnings and in- structions in manual and on attachment.

WARNING: Ensure handlebar is installed when using brushcutter attach- ments. Attach handlebar above arrow on safety label on the upper shaft (engine end of unit). If your brushcutter attachment does not include a handlebar, a handlebar accessory kit (#530071451) is available from your au- thorized service dealer.

5

Image 5
Contents Manual de Instrucciones Manuel d’Instructions Identification of Safety Symbols Table of ContentsIdentification of Safety Symbols Operator Safety Safety RulesOptional Attachments Always wear face or dust mask if operation is dustyFuel Safety Unit / Maintenance SafetyLine Trimmer Safety Additional Safety RulesBLOWER/VACUUM Safety Edger SafetyBrushcutter Safety HandlebarHedge Trimmer Safety Cultivator SafetyPole Pruner Safety Cut from your right to your leftHigh speed causing injury Snow Thrower SafetyKnow how to stop quickly AnotherAttaching the Shield AssemblyInstalling Trimmer ATTACH- Ment Operation HOW to Start Your Unit HOW to Stop Your UnitStarting a Cold Engine Starting a Warm EngineOperating Position Installing Optional ATTACH- MentsCutting Methods AttachmentLOOSEN KnobCheck for Damaged or Worn Parts MaintenanceCheck for Loose Fasteners and Parts Service and Adjustments Fuel System Carburetor Idle Speed AdjustmentSeasonal Storage Other Troubleshooting Table Cause RemedyEngine Statesville Road Limited WarrantyCanada, contact Ligations The U.S. EnvironmentalIntermediate 125 hours Extended 300 hours

115248826, 952711944 specifications

The Poulan 952711944 and 115248826 are essential components designed to enhance the performance and usability of outdoor power equipment, particularly chainsaws and trimmers. Known for their reliability and efficiency, these parts exemplify Poulan's commitment to delivering high-quality products for both professional users and homeowners.

One of the standout features of the Poulan 952711944 is its durability. Constructed with high-grade materials, it is built to withstand the demanding conditions that come with outdoor work. This durability ensures that the part can resist wear and tear, enabling it to maintain peak performance over an extended period. Furthermore, the precise engineering of the 952711944 ensures compatibility with several Poulan models, making it a versatile choice for users looking to replace or upgrade their equipment.

In terms of technology, the 952711944 incorporates advanced design principles that focus on ease of use and safety. Its ergonomic design allows for straightforward installation, minimizing downtime and getting users back to work quickly. The component is engineered to fit snugly, reducing the risk of vibration during operation, which in turn aids in accuracy and comfort.

On the other hand, the Poulan 115248826 is equally impressive, providing essential support for trimmers. It boasts a lightweight construction, allowing for enhanced maneuverability during operation. This is particularly crucial for those who need to navigate tight spaces or maintain large areas without fatigue. The design also features a user-friendly interface, making it accessible for individuals at any skill level.

Both the 952711944 and 115248826 incorporate technologies that prioritize fuel efficiency and reduced emissions. This eco-conscious approach is particularly relevant in today’s market, where environmental sustainability is a growing concern. Poulan’s advancements in this area demonstrate their commitment to producing equipment that not only performs well but also respects the environment.

In summary, the Poulan 952711944 and 115248826 are pivotal components that embody the brand's dedication to quality and innovation. With their robust build, user-friendly designs, and environmentally friendly technologies, these parts are ideal for anyone looking to enhance the performance of their outdoor power equipment. Whether for professional landscaping or home gardening, the reliability of these components speaks for itself.