Poulan 115248826, 952711944 Assembly, Installing Trimmer ATTACH- Ment, Attaching the Shield

Page 9

ASSEMBLY

WARNING: If received assembled, repeat all steps to ensure your unit is properly assembled and all fasteners are secure.

Examine parts for damage. Do not use dam- aged parts.

NOTE: If you need assistance or find parts missing or damaged, call 1-800-554-6723.

It is normal for the fuel filter to rattle in the empty fuel tank.

Finding fuel or oil residue on muffler is normal due to carburetor adjustments and testing done by the manufacturer.

INSTALLING TRIMMER ATTACH- MENT

CAUTION: When installing trimmer attach- ment, place the unit on a flat surface for stabil- ity.

1.Loosen the coupler by turning the knob counterclockwise.

Coupler

Shipping

protectorLOOSEN

Knob

TIGHTEN

2.Remove shipping protector from coupler.

3.Remove the shaft cap from the trimmer at- tachment (if present).

4.Position locking/release button of attach- ment into guide recess of coupler.

5.Push the attachment into the coupler until the locking/release button snaps into the primary hole.

6.Before using the unit, tighten the knob se- curely by turning clockwise.

Coupler Primary Hole

Guide Recess

Locking/

Upper Release Attachment

Shaft Button

WARNING: Make sure the locking/ release button is locked in the primary hole and the knob is securely tightened before op- erating the unit. All attachments are designed to be used in the primary hole unless otherwise stated in the applicable attachment instruction manual. Using the wrong hole could lead to seri- ous injury or damage to the unit.

Locking/Release

Button in Primary Hole

For assembly of optional attachments (see list on page 11), refer to the ASSEMBLY sec- tion of the applicable attachment instruction manual.

ATTACHING THE SHIELD

WARNING: The shield must be prop- erly installed. The shield provides partial protec- tion from the risk of thrown objects to the opera- tor and others and is equipped with a line limiter blade which cuts excess line to the proper length. The line limiter blade (on underside of shield) is sharp and can cut you. For proper orientation of shield, see KNOW YOUR TRIM- MER illustration in OPERATION section.

1.Remove wing nut from shield.

2.Insert bracket into slot as shown.

3.Pivot shield until bolt passes through hole in bracket.

Bracket

Shield

Slot

4.Reinstall wing nut and tighten securely. WingNut

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Manual de Instrucciones Manuel d’Instructions Identification of Safety Symbols Table of ContentsIdentification of Safety Symbols Operator Safety Safety RulesOptional Attachments Always wear face or dust mask if operation is dustyFuel Safety Unit / Maintenance SafetyLine Trimmer Safety Additional Safety RulesBLOWER/VACUUM Safety Edger SafetyBrushcutter Safety HandlebarHedge Trimmer Safety Cultivator SafetyPole Pruner Safety Cut from your right to your leftHigh speed causing injury Snow Thrower SafetyKnow how to stop quickly AnotherAssembly Installing Trimmer ATTACH- MentAttaching the Shield Operation HOW to Start Your Unit HOW to Stop Your UnitStarting a Cold Engine Starting a Warm EngineOperating Position Installing Optional ATTACH- MentsCutting Methods AttachmentLOOSEN KnobMaintenance Check for Loose Fasteners and PartsCheck for Damaged or Worn Parts Service and Adjustments Carburetor Idle Speed Adjustment Seasonal StorageFuel System Troubleshooting Table Cause Remedy EngineOther Statesville Road Limited WarrantyCanada, contact Ligations The U.S. EnvironmentalIntermediate 125 hours Extended 300 hours

115248826, 952711944 specifications

The Poulan 952711944 and 115248826 are essential components designed to enhance the performance and usability of outdoor power equipment, particularly chainsaws and trimmers. Known for their reliability and efficiency, these parts exemplify Poulan's commitment to delivering high-quality products for both professional users and homeowners.

One of the standout features of the Poulan 952711944 is its durability. Constructed with high-grade materials, it is built to withstand the demanding conditions that come with outdoor work. This durability ensures that the part can resist wear and tear, enabling it to maintain peak performance over an extended period. Furthermore, the precise engineering of the 952711944 ensures compatibility with several Poulan models, making it a versatile choice for users looking to replace or upgrade their equipment.

In terms of technology, the 952711944 incorporates advanced design principles that focus on ease of use and safety. Its ergonomic design allows for straightforward installation, minimizing downtime and getting users back to work quickly. The component is engineered to fit snugly, reducing the risk of vibration during operation, which in turn aids in accuracy and comfort.

On the other hand, the Poulan 115248826 is equally impressive, providing essential support for trimmers. It boasts a lightweight construction, allowing for enhanced maneuverability during operation. This is particularly crucial for those who need to navigate tight spaces or maintain large areas without fatigue. The design also features a user-friendly interface, making it accessible for individuals at any skill level.

Both the 952711944 and 115248826 incorporate technologies that prioritize fuel efficiency and reduced emissions. This eco-conscious approach is particularly relevant in today’s market, where environmental sustainability is a growing concern. Poulan’s advancements in this area demonstrate their commitment to producing equipment that not only performs well but also respects the environment.

In summary, the Poulan 952711944 and 115248826 are pivotal components that embody the brand's dedication to quality and innovation. With their robust build, user-friendly designs, and environmentally friendly technologies, these parts are ideal for anyone looking to enhance the performance of their outdoor power equipment. Whether for professional landscaping or home gardening, the reliability of these components speaks for itself.
Top Page Image Contents