Husqvarna 80792 manual Flail Trimmer Heads

INSTALLATION INSTRUCTIONS

Flail Trimmer Heads

Model View

1

Trimmer

Gearcase

Spacer

Flail Head

Holder A

The three-blade flail head is recom- mended for light- to medium-duty applications. The flail head is great for clearing weeds and heavy grass. NOTE: The three-blade flail head will fit straight shaft grass machines ranging from the Shindaiwa T18 through T270/C270. When installing the head onto a trimmer, notice that Holder B is included with the flail head package.

2

T18, T230/C230
Item	Part No.
Spacer	22035-13230
Holder A	22035-13242
Holder B	99909-331
Bolt Guard	22035-13290
Arbor Bolt	22035-13271
T250/C250, T260/C260
Item	Part No.
Holder A	22420-13510
Holder B	99909-331
Bolt Guard	22024-13291
Arbor Bolt	22000-13512
T270/C270
Item	Part No.
Holder A	22024-13912
Holder B	99909-331
Bolt Guard	22014-13291
Arbor Bolt	22000-13512

Replacement Blades (3 required)

Part No. 99909-148

Holder B

Bolt Guard

Arbor Bolt

If the machine is equipped with a trimmer line head (T18/T230 models), unscrew the head (turn clockwise to remove) and remove all adapters. Replace the spacer and install all parts as shown above. Tighten the arbor bolt securely.

If blades become worn or damaged, they can be replaced by removing the shoulder bolt with a standard flat- blade screwdriver.

3

Insert the new blade and shoulder bolt, and tighten securely.

PARTS LIST

Flail Head

1 Nut (not shown)

2 Washer (not shown)

99909-147
Item	Part No.
1	99909-75	3 Bolt
2	99909-82	4 Flail Blade
3*	99909-149
4*	99909-148

*3 required

23