Husqvarna 80792 Super Flail Trimmer Heads, T250/C250-T260/C260, T350, C350, B450, 99909-1566

Page 24

INSTALLATION INSTRUCTIONS

Super Flail Trimmer Heads

Model View

WARNING! NEVER USE A METAL CUTTING BLADE ON A SUPER FLAIL TRIMMER HEAD!

The three-blade super flail head is a perfect attachment for trimming grass, vegetation, and light brush. The nylon blades are supported by a metal bearing surface for superior perfor- mance and durability.

NOTE: The three-blade super flail head will fit straight shaft grass machines ranging from the Shindaiwa T18 through B530. When installing the head onto a trimmer, notice that Holder B is included with the flail head package (except C350 and T350 units that use a different Holder B).

T18, T230/C230

 

Item

Part No.

 

 

Spacer

22035-13230

Holder A

22035-13242

Holder B

99909-331

Bolt Guard

22035-13290

Arbor Bolt

22035-13271

T250/C250–T260/C260

Item

Part No.

 

 

Holder A

22020-13510

Holder B

99909-331

Bolt Guard

22024-13291

Arbor Bolt

22000-13512

T270/C270

 

Item

Part No.

 

 

Holder A

22024-13912

Holder B

99909-331

Bolt Guard

22024-13291

1

Trimmer

Gearcase

Spacer

Super

Flail Head

Holder A

Holder B

Bolt Guard

Arbor Bolt

If the machine is equipped with a trimmer line head (T18/T230 models), unscrew the head (turn clockwise to remove) and remove all adapters. Replace the spacer and install all parts as shown above. Tighten the arbor bolt securely.

2

If blades become worn or damaged, they can be replaced by removing the locking bolt with a 4 mm allen wrench.

3

Push the bearing out and install it into the new blade, insert the blade and locking bolt, then tighten securely.

Arbor Bolt

22000-13512

T350

 

Item

Part No.

 

 

Holder A

22000-13241

Holder B

99909-331

Bolt Guard

22000-13290

Arbor Bolt

22000-13212

C350, B450

 

Item

Part No.

 

 

Holder A

22015-13241

Holder B

109010

Bolt Guard

22015-13270

Arbor Bolt

22015-13261

PARTS LIST

Super Flail Head

1 Upper Body

4 Bolt

6 Bushing

5 Flail Blade

3 Lower

 

Body

 

99909-1566

2 Nut

 

NOTE:

Replacement flail blades may be purchaced in a pack of 3 (p/n 101058-03 or a pack of 12 (p/n 101058-12).

Item

Part No.

Item

Part No.

1

101017

4*

103011

2*

103012

5*

101058

3

101018

6*

105014

*3 required

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Shindaiwa Trimmer Head Guide Shindaiwa Trimmer Head Guide IntroductionGeneral Trimmer Head Maintenance Information Low Profile Manual Trimmer Head Make sure one line does not slide under the spool Low Profile Head Item Part NoLine Chart 99909-15500 99909-15600 SemiMatic Trimmer Head99909-15500 99909-15600Parts List SemiMatic 99909-15500 99909-15600Load and E-Z Pro Trimmer Heads Line to go under spool Load Pro 99909-017 99909-01899909-028 Line Chart 99909-007 99909-008 High Capacity Trimmer Head99909-007 99909-008Adapter Bolt Line to go under the spoolHigh Capacity 99909-007 99909-008 Midget Manual and High Profile Trimmer Heads Midget Manual High Profile Midget Manual Head 72414-15100High Profile Head 72005-92600 Pro-Matic and Bump ‘N’ Cut Trimmer Heads Pro-Matic UN-32 Bump ‘N’ Cut UN-34 UN34-7LPage Page Page Page UN10 Assembly and Rewinding Instructions UN30 Assembly and Rewinding Instructions UN32 Assembly and Rewinding Instructions Flail Trimmer Heads Super Flail Trimmer Heads T250/C250-T260/C260T350 C350, B450Replacement Line Fixed Line Trimmer HeadsOption 1-Single Line Holder a Option 2-Double LineFor dedicated grass trimmer installation Shindaiwa Heavy-duty Fixed-line Head22T, T230, T231 T2500 T260 and T261Kit R, right-hand thread Part number Shindaiwa Inc
Top Page Image Contents