Husqvarna 327HE4X, 327HE3X Working Techniques, General working instructions, Personal protection

Page 16

WORKING TECHNIQUES

General working instructions

IMPORTANT!

This section takes up the basic safety precautions for working with a hedge trimmer.

If you encounter a situation where you are uncertain how to proceed you should ask an expert. Contact your dealer or your service workshop.

Avoid all usage which you consider to be beyond your capability.

WARNING! The machine can cause

! serious personal injury. Read the safety instructions carefully. Learn how to use the machine.

WARNING! Cutting tool. Do not touch the

! tool without first switching off the engine.

Personal protection

Always wear boots and other equipment described under the heading Personal protective equipment.

Always wear working clothes and heavy-duty long trousers.

Never wear loose clothing or jewellery.

Make sure your hair does not hang below shoulder level.

Safety instructions regarding the surroundings

Never allow children to use the machine.

Ensure that no-one comes closer than 15 m while you are working.

Never allow anyone else to use the machine without first ensuring that they have understood the contents of the operator’s manual.

Never work from a ladder, stool or any other raised position that is not fully secured.

Keep in mind that the operator is responsible for accidents or hazards occuring to other people or their property.

Safety instructions while working

Always ensure you have a safe and stable working position.

Always use both hands to hold the machine. Hold the machine at the side of your body.

Use your right hand to control the throttle setting.

Make sure that your hands and feet do not come near the cutting attachment when the engine is running.

When the engine is switched off, keep your hands and feet away from the cutting attachment until it has stopped completely.

Watch out for stumps of branches that can be thrown out during cutting.

16 – English

Image 16
Contents 327HDA65X-series EnglishKEY to Symbols SymbolsContents Introduction Dear CustomerWhat is WHAT? What is what?General Safety Precautions Personal protective equipmentMachine′s safety equipment Throttle lockoutStop switch Hand guardVibration damping system MufflerGear housing BladesBlade guard 327HDA65Assembly Fitting the hand guard and loop handleFitting the handle Fitting the cutting headFitting the impact guard Adjusting the harness327HE4 Fuel Handling Fuel safetyFuel Fuelling MixingStarting and Stopping Check before startingStarting and stopping StartingStopping Safety instructions regarding the surroundings Safety instructions while workingWorking Techniques General working instructionsBasic working techniques Safety instructions after completing workChanging the hedge trimmer angle Transport position Carburettor MaintenanceMuffler Cooling system Spark plugGear housing Cleaning the air filterAir filter Oiling the air filterCleaning and lubrication Maintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataEC-declaration of conformity Applies to Europe only Page Page 1151377-26