Husqvarna 327HE3X, 327HE4X, 327HDA65X manual Transport position

WORKING TECHNIQUES

(327HDA65)

•Undo the knob.

•Press the cutting unit against the hedge or some other firm surface until the required angle is set.

•Tighten the knob.

WARNING! Do not hold the cutting head

! when you adjust the angle. The blades are sharp and you could easily cut yourself.

Transport position

(327HE4)

Once the work has been completed fold the cutting unit back against the shaft to simplify transport and storage of the hedge trimmer.

1Turn off the engine.

2Loosen the knob on the shaft (clockwise).

3Grip the handle on the cutting unit and angle the cutting unit upwards. At an angle of 90 degrees there is a stop position. To pass the stop position, pull out the lock button.

4Fold down the cutting unit against the shaft.

5Turn the knob (anti-clockwise).

CAUTION! When the stop position has been passed the blades are blocked, do not try to cut with the cutting unit in this position.

18 – English