Husqvarna 325R, 323R manual Fit the appropriate guard

Page 19

ASSEMBLY

Assembling the spray guard and trimmer head Superauto II

Assembling other guards and cutting equipment

•Fit the appropriate guard

(A)for use with the trimmer head. Hook the guard onto the shaft fitting and secure it with the bolt

•Fit the drive disc (B) on the output axle.

•Turn the blade axle until one of the holes in the drive disc aligns with the hole in the gear housing.

•Insert the locking pin (C) in the hole so that the axle is locked.

•The trimmer head must be split to be fitted (see the diagram). Proceed as follows:

•Insert your finger into the centre hole of the cover (I) at the same time as you hold the cover with your other fingers. Press the two catches (J) that extend from the cut-out on the bottom section (K) using the thumb and index finger of your other hand. Press apart the trimmer head using the fingers on the cover.

•Place the cover (I) and the support flange (F) on the output axle.

•Fit the nut (G). The tightening torque of the nut is 35-50 Nm (3,5-5 kpm). Use the socket spanner in the tool kit. Hold the handle of the spanner as close to the trimmer guard as possible. The nut is tightened when the spanner is turned against the direction of rotation (left-hand thread).

•Fit the trimmer head‘s bottom section (K) on the cover (I) by pressing the two sections together with the cut-outs on the bottom section aligned with the catches on the cover.

•To dismantle follow the instructions in the reverse order.

 

K

 

J

 

I

 

K

G

 

F

B

I

C

 

 

A

•Fit the appropriate

guard (A) for use with the trimmer head. Hook the guard onto the shaft fitting and secure it with the bolt (L).

•Fit the disc drive (B) on the output axle.

•Turn the blade axle until one of the disc drive’s holes aligns with the

corresponding hole in

H

 

the gear housing.

 

•Insert the locking pin

(C) into the hole to lock the axle.

• Screw on the trimmer head (H) in the direction of rotation.

•Dismantling takes place

in the reverse order.

English – 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Operators manual EPA Symbols Symbol ExplanationContents Throttle trigger lock Safety InstructionsMachine‘s safety equipment Personal protective equipmentQuick-release Stop switchCutting attachment guard Anti-vibration systemClearing blades are intended for cutting wood MufflerCutting equipment Locking nutThrottle trigger lock Vibration damping system Cutting equipment Trimmer head Cutting equipmentSharpening Grass bladeTransport and storage General safety instructionsFuel safety StartGeneral working instructions Basic safety precautionsBasic clearing techniques Adjusting the harness and clearing sawDesignations Working methods Grass clearing using a grass bladeBrush cutting using the saw blade Clearing‘s ABCSweeping Grass clearing using the trimmer head and plastic bladesClearing TrimmingWhat is what on the brushcutter? What is WHAT?Transport position, handlebars AssemblyAssembling the handlebars 323R Assembling the handlebarsGrass blade Guard. See Technical DataFit the appropriate guard Dismantling Adjusting the harness and clearing sawAssembling and dismantling the two-part shaft 325RXT-series AssemblingFuel mixture Fuel HandlingFuelling Cold engine Start and StopControl before starting Start and stopStart Engine is stopped by switching off the ignitionFor throttle handles with a start throttle lock StopCarburetor MaintenanceHigh speed needle Final setting of the idling speed TCorrectly adjusted carburetor Adjusting the throttle wireTwo-part shaft MufflerCooling system Angle gearFiling the grass blade Air filter Spark plugOiling the air filter Monthly maintenance Maintenance scheduleDaily maintenance Weekly maintenanceTechnical data 323R Technical DataGuard Art No Approved accessories 323R Type Cutting attachmentApproved accessories Type Cutting attachment Centre hole in blades Ø 25,4 mmYour Warranty Rights Obligations Emission Control Warranty StatementSuper Auto Super Auto II Tri Cut Trimmy H Click Trimmy Hit Junior Trimmy Hit Pro 12 cm Trimmy SII 502 26 Page ´+H#y¶5V¨ Page 2001W51 114 00 38

325R, 323R specifications

The Husqvarna 325R and 323R are both impressive trimmers designed for users who demand power, efficiency, and durability in their landscaping equipment. These models showcase Husqvarna's commitment to quality and innovation, making them ideal for both professionals and avid gardeners.

The Husqvarna 325R features a robust 25.4cc X-Torq engine. This engine technology is designed to reduce fuel consumption and emissions, thus promoting eco-friendly gardening. The unit boasts a high power-to-weight ratio, meaning that users can handle heavier workloads without feeling fatigued. The 325R is equipped with a professional-grade gear head that enhances durability while ensuring optimal cutting performance. The trimmer shaft is straight and designed for efficient trimming in hard-to-reach areas.

On the other hand, the Husqvarna 323R also packs a powerful 25cc engine, offering a similar emphasis on reduced emissions and low fuel consumption. With its lightweight design, the 323R provides excellent maneuverability, making it suitable for residential applications as well as light professional work. This model is equipped with an efficient cutting head that utilizes a dual line system for quicker and more effective trimming.

Both models incorporate Smart Start technology, which significantly reduces the effort needed for starting the engine. This feature minimizes resistance in the starter cord, allowing users to get to work quickly. The trimmers also come with an adjustable handle, giving operators the flexibility to achieve the most comfortable grip and stance, resulting in improved control and reduced fatigue during extended use.

Additionally, both the 325R and 323R models are fitted with an anti-vibration system, enhancing comfort for longer sessions. This technology absorbs vibrations, providing a smoother operational experience. The trimmers' fuel tank is designed for extended operation, allowing users to work longer without frequent refueling.

In summary, the Husqvarna 325R and 323R stand out as reliable landscaping tools that cater to a variety of trimming tasks. Both models feature powerful engines, user-friendly technologies, and ergonomic designs that enhance comfort and efficiency. Whether you are a professional landscaper or a dedicated gardener, these trimmers are built to deliver superior performance while prioritizing user satisfaction and environmental responsibility.
Top Page Image Contents