Husqvarna 325R, 323R Grass clearing using the trimmer head and plastic blades, Clearing, Trimming

Page 15

SAFETY INSTRUCTIONS

Grass clearing using the trimmer head and plastic blades.

•Hold the trimmer head just above the ground at an angle. It is the end of the cord that carries out the work. Let the cord work at its own pace. Do not press the cord into the area to be cut.

•The cord can easily remove grass and weeds up against walls, fences, trees and borders, however, it can also damage sensitive bark on trees and bushes and damage fence posts.

•Reduce the risk of damaging plants by shortening the cord to 10-12 cm and reducing the engine speed.

Clearing

•The clearing technique removes all unwanted vegetation. Keep the trimmer head just above the ground and tilt it. Let the end of the cord strike the ground around trees, posts, statues and the like. NOTE! This technique increases the wear on the cord.

•The cord wears quicker and must be fed forward more often when working against stones, brick, concrete, metal fences, etc. than when coming into contact with trees and wooden fences.

•When trimming and clearing you should use less than full throttle so that the cord lasts longer and to reduce the wear on the trimmer head.

Trimming

• The trimmer is ideal to cut grass that is difficult to reach using a normal lawn mower. Keep the cord parallel to the ground when cutting. Avoid pressing the trimmer head against the ground as this can ruin the lawn and damage the tool.

•Do not allow the trimmer head to constantly come into contact with the ground during normal cutting procedures. Constant

contact can cause damage and wear to the trimmer head.

Sweeping

•The rotating cord‘s fanning effect can be

used for quick and easy cleaning. Hold the cord parallel to and above the area to be swept and move the trimmer from side to side.

•When cutting and sweeping you should use full throttle to obtain the best results.

!WARNING!

Beware of thrown objects. Always wear eye protection. Never lean over the guard. Stones, rubbish etc. can be thrown up into the eyes resulting in blindness or other serious injury.

Keep unauthorised persons at a distance. Children, animals, onlookers and helpers should be outside the safety zone of 15 meters (50 feet). Stop the machine immediately if anyone approaches.

English – 15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Operators manual EPA Symbols Symbol ExplanationContents Throttle trigger lock Safety InstructionsMachine‘s safety equipment Personal protective equipmentQuick-release Stop switchCutting attachment guard Anti-vibration systemClearing blades are intended for cutting wood MufflerCutting equipment Locking nutThrottle trigger lock Vibration damping system Cutting equipment Trimmer head Cutting equipmentSharpening Grass bladeTransport and storage General safety instructionsFuel safety StartGeneral working instructions Basic safety precautionsAdjusting the harness and clearing saw Basic clearing techniquesDesignations Working methods Grass clearing using a grass bladeBrush cutting using the saw blade Clearing‘s ABCSweeping Grass clearing using the trimmer head and plastic bladesClearing TrimmingWhat is what on the brushcutter? What is WHAT?Transport position, handlebars AssemblyAssembling the handlebars 323R Assembling the handlebarsGrass blade Guard. See Technical DataFit the appropriate guard Dismantling Adjusting the harness and clearing sawAssembling and dismantling the two-part shaft 325RXT-series AssemblingFuel Handling Fuel mixtureFuelling Cold engine Start and StopControl before starting Start and stopStart Engine is stopped by switching off the ignitionFor throttle handles with a start throttle lock StopCarburetor MaintenanceHigh speed needle Final setting of the idling speed TCorrectly adjusted carburetor Adjusting the throttle wireTwo-part shaft MufflerCooling system Angle gearAir filter Spark plug Filing the grass bladeOiling the air filter Monthly maintenance Maintenance scheduleDaily maintenance Weekly maintenanceTechnical data 323R Technical DataGuard Art No Approved accessories 323R Type Cutting attachmentApproved accessories Type Cutting attachment Centre hole in blades Ø 25,4 mmYour Warranty Rights Obligations Emission Control Warranty StatementSuper Auto Super Auto II Tri Cut Trimmy H Click Trimmy Hit Junior Trimmy Hit Pro 12 cm Trimmy SII 502 26 Page ´+H#y¶5V¨ Page 2001W51 114 00 38

325R, 323R specifications

The Husqvarna 325R and 323R are both impressive trimmers designed for users who demand power, efficiency, and durability in their landscaping equipment. These models showcase Husqvarna's commitment to quality and innovation, making them ideal for both professionals and avid gardeners.

The Husqvarna 325R features a robust 25.4cc X-Torq engine. This engine technology is designed to reduce fuel consumption and emissions, thus promoting eco-friendly gardening. The unit boasts a high power-to-weight ratio, meaning that users can handle heavier workloads without feeling fatigued. The 325R is equipped with a professional-grade gear head that enhances durability while ensuring optimal cutting performance. The trimmer shaft is straight and designed for efficient trimming in hard-to-reach areas.

On the other hand, the Husqvarna 323R also packs a powerful 25cc engine, offering a similar emphasis on reduced emissions and low fuel consumption. With its lightweight design, the 323R provides excellent maneuverability, making it suitable for residential applications as well as light professional work. This model is equipped with an efficient cutting head that utilizes a dual line system for quicker and more effective trimming.

Both models incorporate Smart Start technology, which significantly reduces the effort needed for starting the engine. This feature minimizes resistance in the starter cord, allowing users to get to work quickly. The trimmers also come with an adjustable handle, giving operators the flexibility to achieve the most comfortable grip and stance, resulting in improved control and reduced fatigue during extended use.

Additionally, both the 325R and 323R models are fitted with an anti-vibration system, enhancing comfort for longer sessions. This technology absorbs vibrations, providing a smoother operational experience. The trimmers' fuel tank is designed for extended operation, allowing users to work longer without frequent refueling.

In summary, the Husqvarna 325R and 323R stand out as reliable landscaping tools that cater to a variety of trimming tasks. Both models feature powerful engines, user-friendly technologies, and ergonomic designs that enhance comfort and efficiency. Whether you are a professional landscaper or a dedicated gardener, these trimmers are built to deliver superior performance while prioritizing user satisfaction and environmental responsibility.
Top Page Image Contents