Husqvarna 142 RB, 152RB, 142RB manual Symbol Explanation, Symbols

Page 2

SYMBOL EXPLANATION

Symbols

WARNING! Clearing saws, brushcutters and trimmers can be dangerous!

Careless or incorrect use can result in serious or fatal injury to the operator or others.

Read through the Operator‘s Manual carefully and understand the content before using the machine.

Always use

A protective helmet where there is a risk of falling objects

Ear protection

Approved eye protection

Max. speed of output axle, rpm

This product is in accordance with applicable CE directives.

• Beware of thrown objects and ricochets.

• Always wear approved protective gloves.

• Use anti-slip and stable boots.

• Only use non-metallic, flexible cutting elements, that is trimmer head with trimmer cord.

Other symbols/decals on the machine refer to special certification requirements for certain markets.

Checks and/or maintenance should be carried out with the engine switched off, with the stop switch in the STOP position.

Always wear approved protective gloves.

15 m 50FT

15 m 50FT

The operator of the machine shall ensure, while working, that no persons or animals come closer than 15 metres.

Machines fitted with clearing or grass blades can be thrown violently to the side when the blade comes into contact with a fixed object. The blade can cause the amputation of arms and legs. Always keep people and animals at least 15 metres from the machine.

Arrows which show limits for handle mounting.

Regular cleaning required.

Ocular control.

Approved eye protection must always be used.

2 – English

Image 2
Contents 142RB/152RB 101 90Symbol Explanation SymbolsContents Personal protective equipment Safety InstructionsMachine‘s safety equipment Muffler Vibration damping systemQuick-release Cutting1 EquipmentSafety Instructions Cutting equipment Trimmer head Cutting equipmentFiling the grass blade General safety instructions General working instructions Basic safety precautionsAdjusting the harness and brush cutter Quick releaseDesignations Brush cutting using a grass bladeBasic clearing techniques Trimming Grass trimming using the trimmer headClearing SweepingWhat is WHAT? What is what on the grass trimmer and the brushcutter?Assembly Assembling the J-handle Assembling the transport guardConnecting throttle cable and stop switch wires Assembling the spray guardCable adjustment Adjusting the harness and brush cutterFuelling Fuel HandlingFuel Start and stop Start and StopControl before starting Carburettor MaintenanceIdle speed adjustment T MufflerAir filter Cooling systemDrive shaft Spark plug Angle gearFiling the grass blade 0,7 mmDaily maintenance Maintenance scheduleWeekly maintenance Monthly maintenanceTechnical Data Technical data 142RB 152RBEU declaration of conformity Only applies to Europe Page ´*3$h¶6W¨ Page 1999W38 Also See