Maintenance schedule, Weekly maintenance

MAINTENANCE

Maintenance schedule

Below follows some general maintenance instructions.

If you need further information please contact your service workshop.

Weekly maintenance

1. Check the starter, the

starter cord and the return

spring.

Daily maintenance

1.	Clean the outside of the
	machine.
2.	Make sure the harness is
	not damaged.
3.	Make sure the throttle
	trigger lock and the
	throttle function
	correctly from a safety

2. Make sure that the

vibration damping

elements are not damaged.

3. Clean the outside of the

spark plug. Remove and

check the electrode gap.

Adjust the gap to 0,6–0,7

mm (0,02–0,03 inch) or

change the spark plug.

4. Clean the cooling fins on

the flywheel.

0,6 - 0,7 mm

point of view.

4. Check that the stop

switch functions.

5. Check that the cutting

head does not rotate

while idling.

6. Clean the air filter.

Replace if necessary.

7. Check the guards for

damage and ensure that

they are not cracked.

Replace the guards if

they have been exposed

to impact or are cracked.

8. Check that the blade is

well centred, is sharp,

and is not cracked. An

uncentred blade causes

vibrations that can result

in damage to the

machine.

9. Check that the trimmer

head is undamaged and

not cracked. Replace the

trimmer head if

necessary.

10. Check that the locking

nut is tight.

11. Check that the blade‘s

transport guard is intact

and that it can be

secured correctly.

12. Check that all nuts and

screws are tightened.

3
4
5
6
7
8
9
10
11
12

5. Clean or replace the

muffler’s spark arrestor

screen (not on mufflers

with a catalytic converter).

6. Clean the carburettor area.

7. Clean the cooling fins on

the cylinder and check that

the air intake in the starter

unit is not blocked.

8. Check that the angle gear

is 3/4 filled with grease.

Fill if necessary using

special grease.

Monthly maintenance

1.Clean the fuel tank using petrol.

2.Clean the carburettor and the area surrounding it.

3.Clean the fan and the area around it.

4.Check the fuel filter and the fuel pipe, replace if necessary.

5.Check all cables and connections.

6.Check the clutch, clutch springs and the clutch drum with regard to wear. Replace if necessary.

7.Change the spark plug.

22 – English