Safety Instructions

Control, maintenance and service of the machine‘s safety equipment

IMPORTANT INFORMATION

•All service and repairs to the machine require special training.

•This applies especially to the machine‘s safety equipment. If the machine does not meet any of the controls listed below you should contact your service workshop.

•The purchase of one of our products guarantees that professional repair and servicing will be carried out on it. If the point of purchase is not one of our servicing dealers, please ask for details of the closest service workshop.

3.Cutting attachment guard

•Check that the guard is undamaged and not cracked.

•Replace the guard if it has been exposed to impact or is cracked.

•Always use the prescribed blade an guard combination, see chapter "Technical data".

1.Throttle trigger lock

•Check that the throttle is locked in the “idling position“ when the throttle trigger lock is in its original position.

•Press in the throttle trigger lock and make sure it returns to its original position when released.

•Ensure that the throttle and throttle trigger lock move easily and that their return spring systems function.

•See section "Start". Start the machine and apply full throttle. Release the throttle and check that the cutting equipment stops and remains at a standstill. If the cutting equipment rotates with the throttle in the idling position then the carburettor‘s idling setting must be checked. See chapter “Maintenance“.

4.Vibration damping system

•Check the vibration damping element regularly for material cracks and distortion.

•Check that the vibration damping element is undamaged and securely attached.

5. Muffler

1.Never use a machine that has a defective muffler.

2.Check regularly that the muffler is secure.

3.If your muffler is fitted with a spark arrestor screen then it should be cleaned regularly. A blocked screen leads to the engine overheating with serious damage as a result. Never use a muffler with a defective spark arrestor screen.

2. Stop switch

•Start the engine and make sure that the engine stops when the stop switch is moved to the stop position.

6 – English