FUEL HANDLING
Mixing
SAlways mix the petrol and oil in a clean container intended for fuel.
SAlways start by flling half the amount of the petrol to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture.
Add the remaining amount of petrol.
SMix (shake) the fuel mixture thoroughly before filling the machine’s fuel tank.
SDo not mix more than one month’s sup-
ply of fuel at a time.
SIf the machine is not used for some time, the fuel tank should be emptied and cleaned.
WARNING: The catalytic con- verter muffler gets very hot during and after use. This also applies during idling. Be aware of the fire hazard, especially when working near flammable substances and/or vapors.
Fuelling
WARNING: Taking the following precautions, will lessen the risk of fire:
Do not smoke or place hot objects near fuel.
Always shut off the engine before refueling.
Always stop the engine and let it cool for a few minutes before refu- elling.
When refueling, open the fuel cap slowly so that any excess pressure is released gently.
Tighten the fuel cap carefully after refueling.
Always move the machine away from the refueling area before starting.
SClean the area around the fuel cap. Contamination in the tank can cause
operating problems.
SEnsure that the fuel is well mixed by shak- ing the container before filling the tank.
Min. 3 m
545196741 Rev. 2 4/30/09 |