Husqvarna 128L, 128C manual Warm engine, Starting And Stopping

Page 13
Warm engine

STARTING AND STOPPING

NOTE: If engine dies, return blue engine choke lever to the closed position and repeat starting steps.

CAUTION! Do not pull the starter cord all the way out and do not let go of the starter handle when the cord is fully extended.

This can damage the machine.

Warm engine

With a warm engine, move the blue engine choke lever to the ½ position. Pull starter rope until engine runs. Move the blue en- gine choke lever to the opened position.

CAUTION!

Do not put any part of your body in marked area. Contact can result in burns to the skin, or electrical shock if the spark plug cap has been damaged. Always use gloves. Do not use a machine with dam- aged spark plug cap.

Stopping

Stop the engine by pushing and holding the stop switch in the STOP position until the engine stops.

WARNING: When the engine is started with the choke in the closed position the cutting attachment will start to rotate immediately.

CAUTION! The stop switch automatically returns to the start position. In order to pre- vent unintentional starting, the spark plug cap must be removed from the spark plug when assembling, checking and/or per- forming maintenance.

545196741 Rev. 2 4/30/09

English--- 13

Image 13
Contents EN 2-22 FR 23-43 ES Symbols SYMBOL EXPLANATIONContents CONTENTSNote the following before starting What is what? WHAT IS WHAT?128L 128CPersonal protective equipment GENERAL SAFETY PRECAUTIONSStop switch Machine’s safety equipmentThrottle lock-out Muffler Cutting attachment guardTrimmer head Cutting equipmentFitting the loop handle ASSEMBLYFitting the trimmer guard and trimmer head Model 128L Fitting the trimmer guard and trimmer head Model 128CFUEL HANDLING Fuel safetyFuel Transport and storageMixing FuellingCheck before starting STARTING AND STOPPINGStarting and stopping Cold engineStopping Warm engineWORKING TECHNIQUES Basic safety rulesGeneral working instructions Basic working techniquesCutting ClearingSweeping Stop the machine immediately if anyone approachesUnit/Maintenance Safety MAINTENANCEBasic setting Fine adjustment of the idle speed-TSpark plug Cleaning the air filterAir filter Bevel gear 128LMaintenance Maintenance scheduleMaintenance Maintenance DailyTechnical data TECHNICAL DATAEC Declaration of Conformity Only applies to Europe DECLARATION OF CONFORMITYCOUNCIL’S DIRECTIVES 6 m 20i 3 m Trimmer Head Line Loading Instructions545196741 Rev Plastic Blades Tri Cut4/30/09 English