Technical Data, Technical data | Husqvarna 128L, 128C guide

TECHNICAL DATA

Technical data

Engine	128C	128L
Engine
Cylinder volume, cm3	28	28
Cylinder bore, mm	35	35
Stroke, mm	28,7	28,7
Idle speed, rpm	2,800--3,200	2,800--3,200
Recommended max. speed, rpm	10000	11000
Speed of output shaft, rpm	8000	8000
Max. engine output, acc. to ISO 8893, hp/kW	0,8	0,8
Catalytic converter muffler	Yes	Yes
Speed--regulated ignition system	Yes	Yes
Ignition system
Manufacturer/type of ignition system	Walbro/CD	Walbro/CD
Spark plug	Champion	Champion
	RCJ--8Y	RCJ--8Y
Electrode gap, mm	0,6	0,6
Fuel and lubrication system
Manufacturer/type of carburetor	Zama	Zama
Fuel tank capacity, liter	0,4	0,4
Weight
Weight without fuel, cutting attachment and guard, kg	4,4	4,8
Noise emissions
(see note 1)
Sound power level, measured dB(A)	109	109
Sound power level, guaranteed LWA dB(A)	114	114
Noise levels
(see note 2)
Equivalent noise pressure level at the operators’ ear,
measured according to EN/ISO 11806 and ISO 22868,
dB(A)	100	100
Vibration levels
Vibration levels at handles, measured according to
EN/ISO 11806 and ISO 22867,
FRONT HANDLE
Idling, m/s2	3,9	3,9
Racing, m/s2	5,6	5,6
REAR HANDLE
Idling, m/s2	2,9	2,9
Racing, m/s2	8,5	8,5
At idle, left/right handles:	3/5	3/5

Note 1: Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/EC.

Note 2: Equivalent sound pressure level is calculated as the time--weighted energy total for sound pressure levels under various working conditions with the following time distribution: 1/2 idling and 1/2 max speed.

NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting equipment fitted. The table indicates the highest and lowest values.

Model 128C (3/8 RH arbor shaft thread)
Approved accessories	Type	Cutting attachment guard, part. no.
Trimmer head	T25	537 33 83--03

Model 128L (M10 LH arbor shaft thread)
Approved accessories	Type	Cutting attachment guard, part. no.
Trimmer head	T25	537 33 83--02
Plastic blades	Tricut 300 mm	531 00 38--11
545196741 Rev. 2 4/30/09		English--- 19