SYMBOL EXPLANATION
Symbols
WARNING: Clearing saws, brush- cutters and trimmers can be dan- gerous! Careless or incorrect use can result in serious or fatal injury to the operator or others.
Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.
Always wear:
SA protective helmet where there is a risk of falling objects
SHearing protection
SApproved eye protection
Max. speed of output shaft, rpm
Beware of thrown objects and ricochets.
The operator of the machine shall ensure, while working, that no persons or animals come closer than 15 metres.
Arrows which show limits for handle mounting.
Always wear approved protective gloves.
Use
Only use
This product is in accordance with applicable EC directives.
545196741 Rev. 2 4/30/09
Only intended for trimmer heads.
Noise emission to the environment according to the European Community’s Directive. The machine’s emission is specified in the Technical data section and on label.
Sound pressure level at 7,5 metres
Use unleaded or quality leaded gasoline and
Other symbols/decals on the machine refer to special certification requirements for certain markets.
Stop the engine by pushing and holding the stop switch
in the STOP position. CAUTION! The stop switch automatically returns to the start position.
In order to prevent unintentional starting, the spark plug cap must be removed from the spark plug when assembling, checking and/or performing maintenance.
Regular cleaning is required.
Visual check.
Approved eye protection must always be used.