Husqvarna 128C Starting And Stopping, Check before starting, Starting and stopping, Cold engine

Page 12
STARTING AND STOPPING

STARTING AND STOPPING

Check before starting

WARNING: When the engine is started with the choke in either the choke or start throttle positions the cutting attachment will start to rotate immediately.

SNever start the machine indoors. Exhaust

fumes can be dangerous if inhaled.

SObserve your surroundings and make sure that there is no risk of people or

animals coming into contact with the cutting equipment.

SPlace the machine on the ground, ensure the cutting attachment is clear of twigs and stones. Hold the body of the machine on the ground using your left hand (CAUTION! Not with your foot). Then grip the starter handle with your right hand and pull the starter cord.

SCheck that the trimmer head and trimmer guard are not damaged or cracked. Replace the trimmer head or trimmer guard if they have been exposed to impact or are cracked.

SNever use the machine without a guard nor with a defective guard.

545196741 Rev. 2 4/30/09

Starting and stopping

WARNING: The complete clutch, clutch cover, and shaft must be fitted before the machine is started, otherwise parts could come loose and cause personal injury.

Always move the machine away from the refueling area before starting. Place the machine on a flat surface. Ensure the cutting at- tachment cannot come into contact with any object.

Make sure no unauthorized persons are in the working area, otherwise there is a risk of serious personal injury. The safety distance is 15 meters.

Cold engine

Primer bulb: Press the primer bulb 10 times until fuel begins to fill the bulb. The primer bulb need not be completely filled.

Choke: Move the blue engine choke lever over to the closed position.

Starting

Hold the body of the machine on the ground using your left hand (CAUTION! Not with your foot!).

Firmly grip the starter rope handle with your right hand. DO NOT squeeze throttle trigger. Slowly pull out the cord until you feel some resistance (the starter pawls grip); then quickly and powerfully pull the cord.

Never wrap the starter cord around your hand.

Repeat pulling the cord until the engine attempts to start. Move the blue engine choke lever to the ½ position. Pull starter rope until engine runs. Move the blue en- gine choke lever to the opened position.

English--- 12

Image 12
Contents EN 2-22 FR 23-43 ES SYMBOL EXPLANATION SymbolsCONTENTS ContentsNote the following before starting WHAT IS WHAT? What is what?128L 128CGENERAL SAFETY PRECAUTIONS Personal protective equipmentMachine’s safety equipment Stop switchThrottle lock-out Cutting attachment guard MufflerCutting equipment Trimmer headASSEMBLY Fitting the loop handleFitting the trimmer guard and trimmer head Model 128L Fitting the trimmer guard and trimmer head Model 128CFuel safety FUEL HANDLINGFuel Transport and storageFuelling MixingSTARTING AND STOPPING Check before startingStarting and stopping Cold engineWarm engine StoppingBasic safety rules WORKING TECHNIQUESGeneral working instructions Basic working techniquesClearing CuttingSweeping Stop the machine immediately if anyone approachesMAINTENANCE Unit/Maintenance SafetyBasic setting Fine adjustment of the idle speed-TCleaning the air filter Spark plugAir filter Bevel gear 128LMaintenance schedule MaintenanceMaintenance Maintenance DailyTECHNICAL DATA Technical dataDECLARATION OF CONFORMITY EC Declaration of Conformity Only applies to EuropeCOUNCIL’S DIRECTIVES Trimmer Head Line Loading Instructions 6 m 20i 3 mPlastic Blades Tri Cut 545196741 Rev4/30/09 English