Ryobi 2075r manual Introduction, Table of Contents

INTRODUCTION

THANK YOU

Thank you for purchasing this quality product. This modern outdoor power tool is designed to provide many hours of useful service. You will find it to be a great labor-saving device.

This operator’s manual provides you with easy-to- understand operating instructions. Read the entire manual and follow all of the instructions to keep your new outdoor power tool in top operating condition.

The other manual that came with your power tool, the parts manual, contains all of the information that you need to order parts.

PRODUCT REFERENCES, ILLUSTRATIONS AND SPECIFICATIONS

All information, illustrations and specifications in this manual are based on the latest product information available at the time of printing. We reserve the right to make changes at any time without notice.

Copyright © 1998 Ryobi Outdoor Products, Inc. All Rights Reserved.

Bump Head™ is a trademark of Ryobi Outdoor Products.

Click-Link®is a registered trademark of Ryobi Outdoor Products.

SpeedSpool® is a registered trademark of Ryobi Outdoor Products.

SERVICE INFORMATION

Service on this unit both within and after the warranty period should be performed only by an authorized and approved service dealer.

Dial 1-800-345-8746in the United States and 1-800-265-6778in Canada to obtain the listing of the authorized service dealer nearest you.

Do not return the unit to the retailer.

NOTE: PROOF OF PURCHASE WILL BE REQUIRED FOR WARRANTY SERVICE.

Make sure this manual is carefully read and understood before starting or operating this equipment.

THIS PRODUCT IS COVERED BY ONE OR MORE OF THE US PATENTS LISTED BELOW: 5,076,149; 4,901,682; 4,779,405; 4,651,422; 4,505,040; 4,463,498; 4,369,742; 4,342,236; 4,223,441; 2,125,688; D-249,012; D-239,329;

OTHER PATENTS PENDING.

TABLE OF CONTENTS

I. California Emission Regulations . . . . . . . . 3

II. Safety Warnings . . . . . . . . . . . . . . . . . . 3-6 A. Safety and International Symbols . . . 5-6

III. Assembly Instructions . . . . . . . . . . . . . . . 7 A. Installing the Loop Handle . . . . . . . . . 7 B. Installing the String Guard . . . . . . . . . . 7

IV. Oil and Fuel Information 8

V. Operating Instructions . . . . . . . . . . . . 9-11

A. Starting/Stopping Instructions . . . . . . . 9

B. Operating Click-Link System . . . . . . . 10

C. Adjusting Trimming Line Length . . . . . 11

D. Decorative Trimming . . . . . . . . . . . . . 11

E. Edging . . . . . . . . . . . . . . . . . . . . . . . . 11

VI. Maintenance and Repair Instructions .11-16
A. Maintenance Schedule	11
B. Line Installation for the SpeedSpool .	.12
C. Winding the Existing Inner Reel with New
Line	12
1. Releasing the Inner Reel	13
2. Cleaning the SpeedSpool	13
D. Installing a Prewound Reel	14
E. Air Filter Maintenance	14
F. Carburetor Adjustment	15
G. Replacing the Spark Plug	16
H. Cleaning and Storage	16

VII. Troubleshooting Chart . . . . . . . . . . . . . . 17

VII. Specifications . . . . . . . . . . . . . . . . . . . . 18

IX. Warranty . . . . . . . . . . . . . . . . . . . . . . . . 19

CONTENTS OF CARTON

This unit should consist of the following:

•Model 2075r Assembled with SpeedSpool Cutting Head

•Loop Handle and Hardware

•Handle Bottom Clamp

•String Guard and Hardware

•4 oz. Bottle of 2-Cycle Oil

•Operator's Manual and Parts Manual

•Owner’s Registration/Warranty Card

2