SAFETY WARNINGS
• IMPORTANT SAFETY INFORMATION •
READ ALL INSTRUCTIONS
BEFORE OPERATING
•Read the instructions carefully. Be familiar with the controls and proper use of the unit.
•Children and adolescents must not manipulate units, except for adolescents in training and under the supervision of a specialist.
•All guards and safety attachments must be installed properly before operating the unit.
•Thoroughly inspect the unit for loose or damaged parts before each use. Do not use until adjustments or repairs are made.
•Carefully inspect the areas to be cut. Remove all debris that could become entangled in the string or blade. Also remove any objects that could be thrown during cutting.
•Be aware of the risk of injury to the head, hands and feet.
SAFETY WARNINGS FOR GAS TRIMMERS
WARNING: Gasoline is highly flammable and its vapors can explode if ignited. Take the following precautions:
1)Store fuel only in containers specifically designed and approved for the storage of such materials.
2)Always stop the engine and allow it to cool before filling the fuel tank. Never remove the cap of the fuel tank, or add fuel, when the engine is hot.
3)Pressure can build up in the fuel tank. Loosen the fuel tank cap slowly to relieve any pressure in the tank.
4)Add fuel in a clean,
5)Ensure correct fuel or fuel/oil mixture is used. Never operate the unit without the fuel cap securely in place.
6)Move the unit at least 10 feet (3 m) from the fueling point before starting the engine. Do not smoke, keep sparks and open flames away from the area while adding fuel or operating the unit.
WHILE OPERATING
•Wear safety glasses or goggles and ear/hearing protection at all times when operating this unit. Always wear a face or dust mask if the operation is dusty.
•Dress properly. Do not operate this unit when barefoot or wearing open sandals. Always wear sturdy,
•Do not wear loose fitting clothing or articles such as scarves, strings, chains, ties, etc. because they could get drawn into the air intake. Also make sure long hair does not get drawn into the air intake. Long hair must be pulled back and secured off shoulders and neck.
•The string guard must be in place at all times while operating the unit.
•Before each use, check that the cutting head is correctly fixed, that the trigger returns automatically in neutral position, and that the cutting head remains stationary when the engine is idling.
•Before starting, adjust the handle to your size and make sure that the cutting head is not in contact with anything.
•Use the unit only in daylight or good artificial light.
•Operate this unit only in a
•Avoid accidental starting. Be in the starting position whenever pulling the starting rope. The operator and unit must be in a stable position while starting.
•Use the right tool. Do not use this unit for any job except for which it is intended.
•Do not overreach. Keep proper footing and balance at all times.
•Always hold the unit with both hands when operating. Keep a firm grip on both the front and rear handles or grips.
•Keep hands, face, and feet away from all moving parts. Do not attempt to touch or stop the cutting head when it is rotating.
•Do not touch the muffler or cylinder. These parts get extremely hot from operation and remain hot for a short time after the equipment is turned off.
4