Snapper ERP2187519BV, EP2187519BV specifications Operation, Stopping, Propelling the Mower

Page 10

Operation (Continued)

Starting and Operation (Continued)

Handle Height Adjustment

Propelling the Mower

1.Start the engine. Refer to the Section entitled “Starting and Operation – Engine and Blade”.

2.Move the ground speed control (A, Figure 5) to the desired speed position.

3.Squeeze the wheel drive control (B) against the handle to engage the wheel drive and propel the mower forward. Forward speed can be adjusted while the mower is moving by changing the position of the ground speed control.

A

B

Operation

Figure 5: Mower drive controls

Stopping

1.Stop forward motion of the mower by releasing the wheel drive control.

2.Stop the engine and blade by releasing the blade control.

The height of the mower handle can be adjusted as follows:

1.Loosen the lower nuts (A, Figure 6) on each lower handle.

B

A

Figure 6: Adjusting the handle height

2.Move the handle assembly (B) up or down until the desired position is achieved.

3.Tighten the lower nuts on each lower handle to maintain the desired position.

!

WARNING

!

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

8

www.snapper.com

Page 9 Page 11
Image 10
Page 9 Page 11
Contents European 21 Steel Deck Walk Mowers Series Date of Purchase Retailer Retailers Phone Number Equipment EngineTable of Contents Preparation From Previous Column Protection for ChildrenSlope Operation PreparationOperation Maintenance and StorageSafe Handling of Gasoline From Previous Operation From Previous ColumnDecal Identification MCDONOUGH, GA 30253 USAOperator Safety Engine Speed Control Features and Controls Features and ControlsStarting and Operation Operation Pre-Start Check ListEngine and Blade Stopping OperationPropelling the Mower Recycling Operation Cutting Height AdjustmentRemoving the Recycling Cover Installing the Discharge Deflector Installing the Grass Bag AdapterInstalling the Recycling Plug Installing the Grass BagCheck Grease Level in Transmission Maintenance Maintenance IntroductionService After First 5 Hours Change Engine OilService Periodic MaintenanceStorage Procedure Ninja Blade Wear Limit Mower Blade ReplacementStandard Blade Wear Limit Blade SharpeningWheel Drive Control Adjustment Sharpening the mower bladeDrive Spring Repair/Replacement Driven and Drive Disc ServiceCleaning Drive Disc & Driven Disc Driven Disc AdjustmentDriven Disc Replacement Adjusting the driven discDriven Disc Bearing Replacement Removing the driven disc assemblyEngine Drive Belt Replacement Stretch Type Belts Belt ServiceReplacing the Bearing On the Pulley End Of the Hex Shaft Transmission Poly-V Belt Replacement ProcedureService Schedule Maintenance/Replacement PartsTroubleshooting Probable Cause Corrective ActionYear Limited Warranty Page Page Page Page Page Page Product Specifications Common Service Parts European

ERP2187519BV, EP2187519BV specifications

The Snapper ERP2187519BV, also known as EP2187519BV, is a highly versatile and efficient piece of equipment designed to meet the demanding needs of various industries. This model is known for its reliability, ease of use, and advanced features that streamline operations and enhance productivity.

One of the key features of the Snapper ERP2187519BV is its robust construction. Designed with durability in mind, it can withstand heavy usage in tough environments, making it an ideal choice for industrial applications. The equipment is made from high-quality materials that resist wear and tear, ensuring longevity and reducing maintenance costs.

The Snapper ERP2187519BV is equipped with a powerful motor that offers efficient performance and optimal energy consumption. The motor is designed to deliver consistent power output, allowing users to complete tasks more quickly and effectively. This efficiency not only improves productivity but also results in lower operating costs.

In terms of technology, the Snapper ERP2187519BV features advanced control systems that enable precise operation. The user interface is intuitive, providing operators with easy access to various settings and operational modes. This allows for quick adjustments to be made, accommodating different tasks and environments seamlessly.

Another standout characteristic of the Snapper ERP2187519BV is its versatility. It comes with multiple attachments and accessories that can be easily swapped out, allowing it to perform a wide range of functions. Whether for landscaping, maintenance, or construction, the flexibility of this equipment makes it a valuable asset in any workflow.

Additionally, the Snapper ERP2187519BV emphasizes user comfort and safety. With ergonomic designs and safety features integrated into its operation, users can work more comfortably and securely. This consideration for the operator’s experience enhances productivity while minimizing the risk of accidents.

Overall, the Snapper ERP2187519BV stands out in the market for its combination of durability, advanced technology, versatility, and user-friendly design. It is engineered to help professionals tackle various challenges efficiently, making it an indispensable tool in today’s fast-paced industrial landscape. Whether used in small businesses or large enterprises, it meets the high standards of performance and reliability that users demand.
Top Page Image Contents