Snapper ERP2187519BV, EP2187519BV Wheel Drive Control Adjustment, Sharpening the mower blade

Page 17

Maintenance (Continued)

!

WARNING

!

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

Blade Sharpening (Continued)

4.Sharpen the blade on a grinding wheel at an angle of 22 to 28 degrees (B, Figure 21). DO NOT sharpen the blade beyond the original cutting edge (A).

Do not sharpen beyond original cutting edge

22-280

G

D

F

D

A

B

C

E

A

C

B

End view of blade assembly

A

Figure 21: Sharpening the mower blade

5.Check blade for balance. If necessary, correct balance by grinding heavy end of blade.

6.Reinstall blade (B, Figure 20). Note the correct assembly order:

(A)Blade hub

(B)Blade

(C)Blade flange (facing up)

(D)Cone washer (concave side up)

(E)Capscrew

7.Check torque of blade retaining cap screw. Recommended torque should be 40 ft. lbs.

Figure 22: Wheel drive control adjustment

2.To adjust, unhook the upper spring (D) from the cable eye and rotate the spring in the direction required to extend or shorten the spring length.

3.Rehook the upper spring to the cable eye and check clearance. Repeat the procedure if required.

Note: The vinyl spring cover (B) should be kept over the spring at all times except for adjustments.

4.If the wheel drive control fails to return quickly to the “OFF” position when released, check for binding at the cable holdings located on the side of the right handle. The upper clip should be located 2” below the upper knob; the lower clip should be 4” above the lower knob. The cable should slide freely with the clips installed at these locations.

Maintenance

Wheel Drive Control Adjustment

1.The wheel drive control is properly adjusted when there is 1/16” to 1/8” clearance (G, Figure 22) between the inside of the spring hook (E) and the inside of the clutch cable eye (C) with the wheel drive control released.

15

Page 16 Page 18
Image 17
Page 16 Page 18
Contents European 21 Steel Deck Walk Mowers Series Engine Date of Purchase Retailer Retailers Phone Number EquipmentTable of Contents Slope Operation Protection for ChildrenPreparation From Previous Column PreparationSafe Handling of Gasoline From Previous Maintenance and StorageOperation Operation From Previous ColumnMCDONOUGH, GA 30253 USA Decal IdentificationOperator Safety Engine Speed Control Features and Controls Features and ControlsEngine and Blade Operation Pre-Start Check ListStarting and Operation Propelling the Mower OperationStopping Removing the Recycling Cover Cutting Height AdjustmentRecycling Operation Installing the Grass Bag Adapter Installing the Discharge DeflectorInstalling the Grass Bag Installing the Recycling PlugService After First 5 Hours Maintenance Maintenance IntroductionCheck Grease Level in Transmission Change Engine OilStorage Procedure MaintenanceService Periodic Standard Blade Wear Limit Mower Blade ReplacementNinja Blade Wear Limit Blade SharpeningSharpening the mower blade Wheel Drive Control AdjustmentCleaning Drive Disc & Driven Disc Driven and Drive Disc ServiceDrive Spring Repair/Replacement Driven Disc AdjustmentAdjusting the driven disc Driven Disc ReplacementRemoving the driven disc assembly Driven Disc Bearing ReplacementReplacing the Bearing On the Pulley End Of the Hex Shaft Belt ServiceEngine Drive Belt Replacement Stretch Type Belts Procedure Transmission Poly-V Belt ReplacementMaintenance/Replacement Parts Service ScheduleProbable Cause Corrective Action TroubleshootingYear Limited Warranty Page Page Page Page Page Page European Product Specifications Common Service Parts

ERP2187519BV, EP2187519BV specifications

The Snapper ERP2187519BV, also known as EP2187519BV, is a highly versatile and efficient piece of equipment designed to meet the demanding needs of various industries. This model is known for its reliability, ease of use, and advanced features that streamline operations and enhance productivity.

One of the key features of the Snapper ERP2187519BV is its robust construction. Designed with durability in mind, it can withstand heavy usage in tough environments, making it an ideal choice for industrial applications. The equipment is made from high-quality materials that resist wear and tear, ensuring longevity and reducing maintenance costs.

The Snapper ERP2187519BV is equipped with a powerful motor that offers efficient performance and optimal energy consumption. The motor is designed to deliver consistent power output, allowing users to complete tasks more quickly and effectively. This efficiency not only improves productivity but also results in lower operating costs.

In terms of technology, the Snapper ERP2187519BV features advanced control systems that enable precise operation. The user interface is intuitive, providing operators with easy access to various settings and operational modes. This allows for quick adjustments to be made, accommodating different tasks and environments seamlessly.

Another standout characteristic of the Snapper ERP2187519BV is its versatility. It comes with multiple attachments and accessories that can be easily swapped out, allowing it to perform a wide range of functions. Whether for landscaping, maintenance, or construction, the flexibility of this equipment makes it a valuable asset in any workflow.

Additionally, the Snapper ERP2187519BV emphasizes user comfort and safety. With ergonomic designs and safety features integrated into its operation, users can work more comfortably and securely. This consideration for the operator’s experience enhances productivity while minimizing the risk of accidents.

Overall, the Snapper ERP2187519BV stands out in the market for its combination of durability, advanced technology, versatility, and user-friendly design. It is engineered to help professionals tackle various challenges efficiently, making it an indispensable tool in today’s fast-paced industrial landscape. Whether used in small businesses or large enterprises, it meets the high standards of performance and reliability that users demand.
Top Page Image Contents