Snapper ERP2187519BV, EP2187519BV Belt Service, Engine Drive Belt Replacement Stretch Type Belts

Page 21

Maintenance (Continued)

!

WARNING

!

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

Replacing the Bearing On the Pulley End Of the Hex Shaft

To replace the bearing on the pulley end of the hex shaft, proceed as follows:

1.Hold the hex shaft with an adjustable wrench held next to the pulley.

2.Remove the 3/8” hex lock nut (B, Figure 31), located on the outside of the right wheel bracket.

3.Remove the holder (A), O-ring (C) and bearing (D).

4.Install the new bearing.

5.Carefully install the new O-ring over the outside of the new bearing.

6.Install the bearing holder, and secure with screws.

7.Install the 3/8” hex lock nut.

D

C

Belt Service

On self-propelled mowers, the engine belt (A, Figure 32) transmits power from the engine pulley (B) to the drive disc

(C). The drive disc powers the poly-v belt, which engages the transmission that powers the rear wheels. Should these belts become worn, they could cause slippage, which would impair mower performance. The condition of the engine belt and poly-v belt should be checked after every 25 hours of mower operation.

Engine Drive Belt Replacement (Stretch Type Belts)

1.Empty the fuel tank.

2.Note the belt routing (Figure 32). There is no idler pulley on these models to disconnect.

A

C

B

Figure 32: Engine drive belt routing

Maintenance

B

A

Figure 31: Replacing the hex shaft bearing

19

Page 20 Page 22
Image 21
Page 20 Page 22
Contents European 21 Steel Deck Walk Mowers Series Engine Date of Purchase Retailer Retailers Phone Number EquipmentTable of Contents Slope Operation Protection for ChildrenPreparation From Previous Column PreparationSafe Handling of Gasoline From Previous Maintenance and StorageOperation Operation From Previous ColumnMCDONOUGH, GA 30253 USA Decal IdentificationOperator Safety Engine Speed Control Features and Controls Features and ControlsOperation Pre-Start Check List Starting and OperationEngine and Blade Operation StoppingPropelling the Mower Cutting Height Adjustment Recycling OperationRemoving the Recycling Cover Installing the Grass Bag Adapter Installing the Discharge DeflectorInstalling the Grass Bag Installing the Recycling PlugService After First 5 Hours Maintenance Maintenance IntroductionCheck Grease Level in Transmission Change Engine OilMaintenance Service PeriodicStorage Procedure Standard Blade Wear Limit Mower Blade ReplacementNinja Blade Wear Limit Blade SharpeningSharpening the mower blade Wheel Drive Control AdjustmentCleaning Drive Disc & Driven Disc Driven and Drive Disc ServiceDrive Spring Repair/Replacement Driven Disc AdjustmentAdjusting the driven disc Driven Disc ReplacementRemoving the driven disc assembly Driven Disc Bearing ReplacementBelt Service Engine Drive Belt Replacement Stretch Type BeltsReplacing the Bearing On the Pulley End Of the Hex Shaft Procedure Transmission Poly-V Belt ReplacementMaintenance/Replacement Parts Service ScheduleProbable Cause Corrective Action TroubleshootingYear Limited Warranty Page Page Page Page Page Page European Product Specifications Common Service Parts

ERP2187519BV, EP2187519BV specifications

The Snapper ERP2187519BV, also known as EP2187519BV, is a highly versatile and efficient piece of equipment designed to meet the demanding needs of various industries. This model is known for its reliability, ease of use, and advanced features that streamline operations and enhance productivity.

One of the key features of the Snapper ERP2187519BV is its robust construction. Designed with durability in mind, it can withstand heavy usage in tough environments, making it an ideal choice for industrial applications. The equipment is made from high-quality materials that resist wear and tear, ensuring longevity and reducing maintenance costs.

The Snapper ERP2187519BV is equipped with a powerful motor that offers efficient performance and optimal energy consumption. The motor is designed to deliver consistent power output, allowing users to complete tasks more quickly and effectively. This efficiency not only improves productivity but also results in lower operating costs.

In terms of technology, the Snapper ERP2187519BV features advanced control systems that enable precise operation. The user interface is intuitive, providing operators with easy access to various settings and operational modes. This allows for quick adjustments to be made, accommodating different tasks and environments seamlessly.

Another standout characteristic of the Snapper ERP2187519BV is its versatility. It comes with multiple attachments and accessories that can be easily swapped out, allowing it to perform a wide range of functions. Whether for landscaping, maintenance, or construction, the flexibility of this equipment makes it a valuable asset in any workflow.

Additionally, the Snapper ERP2187519BV emphasizes user comfort and safety. With ergonomic designs and safety features integrated into its operation, users can work more comfortably and securely. This consideration for the operator’s experience enhances productivity while minimizing the risk of accidents.

Overall, the Snapper ERP2187519BV stands out in the market for its combination of durability, advanced technology, versatility, and user-friendly design. It is engineered to help professionals tackle various challenges efficiently, making it an indispensable tool in today’s fast-paced industrial landscape. Whether used in small businesses or large enterprises, it meets the high standards of performance and reliability that users demand.
Top Page Image Contents