Snapper ERP2187519BV, EP2187519BV Operation Pre-Start Check List, Starting and Operation

Page 9

Operation

Pre-Start Check List

Make the following checks and perform the service required before each start-up.

1.Check the guards, deflectors, grass bag, adapter, and covers to make sure all are in place and securely tightened.

2.Check the blade control (A, Figure 1), wheel drive control (B), and ground speed control (C) to insure they work freely.

Starting and Operation

Engine and Blade

1.Move the engine speed control to the fast (‘Rabbit’) position.

2.Push the primer button (A, Figure 3) three times to start a cold engine.

NOTE: The primer should not be required to restart a warm engine.

A

C

B

Figure 1: Mower controls

A

Figure 3: Engine primer

Operation

3.Check the cutting height. Adjust to the desired height. Refer to the Section entitled ‘Cutting Height Adjustment’.

4.Check the engine oil (A, Figure 2) and add oil as needed to bring the level up to the full mark. Refer to the Engine Owner’s Manual for oil specifications.

A

B

Figure 2: Oil and fuel fill

5.Add fuel to the tank after pushing the mower outside where fumes can safely dissipate. Fill the tank to 1-1/2 inches below the top of the filler neck (to allow for fuel expansion). Make sure the cap (B, Figure 2) is tightened after fueling. Refer to the Engine Owners Manual for fuel specifications.

6.Clean the exterior surfaces of the cutting deck and engine of any accumulation of spilled fuel, dirt, grass, oil, etc. Keep the engine air intake screen and cooling fins clear at all times.

3.Pull the blade control (A, Figure 4) against the handle.

4.Pull the rope start handle (B) to crank the engine.

5.After the engine starts, allow a brief warm-up until the engine runs smooth before beginning mower operation.

NOTE: To stop the engine (and blade), release the blade control.

A

B

Figure 4: Starting the mower

7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents European 21 Steel Deck Walk Mowers Series Engine Date of Purchase Retailer Retailers Phone Number EquipmentTable of Contents Slope Operation Protection for ChildrenPreparation From Previous Column PreparationSafe Handling of Gasoline From Previous Maintenance and StorageOperation Operation From Previous ColumnMCDONOUGH, GA 30253 USA Decal IdentificationOperator Safety Engine Speed Control Features and Controls Features and ControlsOperation Pre-Start Check List Starting and OperationEngine and Blade Operation StoppingPropelling the Mower Cutting Height Adjustment Recycling OperationRemoving the Recycling Cover Installing the Grass Bag Adapter Installing the Discharge DeflectorInstalling the Grass Bag Installing the Recycling PlugService After First 5 Hours Maintenance Maintenance IntroductionCheck Grease Level in Transmission Change Engine OilMaintenance Service PeriodicStorage Procedure Standard Blade Wear Limit Mower Blade ReplacementNinja Blade Wear Limit Blade SharpeningSharpening the mower blade Wheel Drive Control AdjustmentCleaning Drive Disc & Driven Disc Driven and Drive Disc ServiceDrive Spring Repair/Replacement Driven Disc AdjustmentAdjusting the driven disc Driven Disc ReplacementRemoving the driven disc assembly Driven Disc Bearing ReplacementBelt Service Engine Drive Belt Replacement Stretch Type BeltsReplacing the Bearing On the Pulley End Of the Hex Shaft Procedure Transmission Poly-V Belt ReplacementMaintenance/Replacement Parts Service ScheduleProbable Cause Corrective Action TroubleshootingYear Limited Warranty Page Page Page Page Page Page European Product Specifications Common Service Parts

ERP2187519BV, EP2187519BV specifications

The Snapper ERP2187519BV, also known as EP2187519BV, is a highly versatile and efficient piece of equipment designed to meet the demanding needs of various industries. This model is known for its reliability, ease of use, and advanced features that streamline operations and enhance productivity.

One of the key features of the Snapper ERP2187519BV is its robust construction. Designed with durability in mind, it can withstand heavy usage in tough environments, making it an ideal choice for industrial applications. The equipment is made from high-quality materials that resist wear and tear, ensuring longevity and reducing maintenance costs.

The Snapper ERP2187519BV is equipped with a powerful motor that offers efficient performance and optimal energy consumption. The motor is designed to deliver consistent power output, allowing users to complete tasks more quickly and effectively. This efficiency not only improves productivity but also results in lower operating costs.

In terms of technology, the Snapper ERP2187519BV features advanced control systems that enable precise operation. The user interface is intuitive, providing operators with easy access to various settings and operational modes. This allows for quick adjustments to be made, accommodating different tasks and environments seamlessly.

Another standout characteristic of the Snapper ERP2187519BV is its versatility. It comes with multiple attachments and accessories that can be easily swapped out, allowing it to perform a wide range of functions. Whether for landscaping, maintenance, or construction, the flexibility of this equipment makes it a valuable asset in any workflow.

Additionally, the Snapper ERP2187519BV emphasizes user comfort and safety. With ergonomic designs and safety features integrated into its operation, users can work more comfortably and securely. This consideration for the operator’s experience enhances productivity while minimizing the risk of accidents.

Overall, the Snapper ERP2187519BV stands out in the market for its combination of durability, advanced technology, versatility, and user-friendly design. It is engineered to help professionals tackle various challenges efficiently, making it an indispensable tool in today’s fast-paced industrial landscape. Whether used in small businesses or large enterprises, it meets the high standards of performance and reliability that users demand.
Top Page Image Contents