Snapper FLT19540RD, ELT2240RD, ELT19540RD Seat Adjustment, Brake Adjustment, Battery Charging

Page 35

Troubleshooting, Adjustment, & Service

Seat Adjustment

The seat can be adjusted forward and back. Move the lever (A, Figure 36), position the seat as desired, and release the lever to lock the seat into position.

Brake Adjustment

This unit does not have a manually adjustable brake.

If the brake does not function properly, see your dealer.

Battery Charging

WARNING

Keep open flames and sparks away from the battery; the gasses coming from it are highly explosive. Ventilate the battery well during charging.

A

Figure 36. Seat Adjustment

A. Seat Adjustment Lever

A dead battery or one too weak to start the engine may be the result of a defect in the charging system or other electrical component. If there is any doubt about the cause of the problem, see your dealer. If you need to replace the battery, follow the steps under “Cleaning the Battery & Cables” in the Regular Maintenance Section.

To charge the battery, follow the instructions provided by the battery charger manufacturer as well as all warnings included in the “Safety Rules” section of this book.

Charge the battery until fully charged. Do not charge at a rate higher than 10 amps.

Fuse Replacement

The fuse is a 20-amp blade type automotive fuse located behind the battery on the steering tower. Replace only with the same rated fuse: 20-amp.

To replace the fuse:

1.Open the hood and locate the fuse holder (B, Figure 37) and fuse (A) attached to the steering tower.

2.Hold the fuse holder (B) and pull out the fuse (A).

3.Inspect the fuse for a broken fusible link (see Figure 38). Replace fuse if connection is broken. If you are not sure if the fusible link is broken, replace fuse.

4.Hold the fuse holder (B, Figure 37) and insert new fuse

(A) until it is seated properly.

B

A

Figure 37. Fuse

A.Fuse, 20-amp

B.Fuse Holder

Solid Fusible Link

Broken Fusible Link

 

 

 

 

 

B

A

Figure 38. Blade Type Fuse

A.Good Fuse with Solid Fusible link

B.No Good Fuse with Broken Fusible link

33

Image 35
Contents Mfg. No Title Description HP Hydro TractorsPage Table of Contents Safety Rules & Information Operating Safety Slope Operation Safety Rules and InformationGeneral Operation Safety Rules & InformationIgnition System Safe Handling of Gasoline Service & MaintenanceTractor ID Tag Mower ID Tag Identification NumbersCE Identification Tag Markings Safety Icons Safety DecalsSafety Decals Transmission Release CE Safety IconsDecal Locations Headlights Control FunctionsThrottle Control ChokeFeatures & Controls Hour Meter Parking Brake FunctionCruise Control Operation Adding Fuel Safety Interlock System TestsGeneral Operating Safety Operational Safety ChecksOperating the Tractor Lift Lever Tractor Hitch Brackets Mower Deck Removal & InstallationRemoving the Mower Deck Muffler and surrounding areas may be hotLock Lever Catcher Removal & InstallationInstalling the Mower Deck Storage Cutting Height AdjustmentAttaching a Trailer Check Tire Pressure Maintenance Schedule & ProceduresRegular Maintenance Transmission Identification Transmission MaintenanceHood Removal and Installation Grease Service Interval Every 25 HoursLubrication OilLubricate Rear Axle Shafts Service Interval YearlyServicing the Mower Blades Service Interval Every 100 Hours or As RequiredCheck Blade Timing Check Mower Blade TimingRecommended Engine Oil Check & Fill Engine OilChange Engine Oil & Filter Oil Drain Valve OperationChange Engine Oil Air Filter Service Air Filter & Pre-Cleaner ServiceAir Filter Removal & Installation Pre-Cleaner ServiceAir Filter Assembly Single Cylinder Models Latch Cover Spark Plug Gapping Replace Spark PlugRegular Maintenance Troubleshooting the Tractor TroubleshootingTroubleshooting the Mower Troubleshooting, Adjustment, & ServiceFuse Replacement Seat AdjustmentBrake Adjustment Battery ChargingAdjust PTO Clutch Window Adjustment Nut Feeler Gauge PTO Clutch AdjustmentTo avoid damaging belts. do not PRY Mower Belt ReplacementMower Blade Timing Arbor Drive Belt ReplacementK46 22 HP* Briggs & Stratton19.5 HP* Briggs & Stratton Maintenance Items Replacement Parts

ELT19540RD, FLT19540RD, ELT2240RD specifications

Snapper has established itself as a leader in the lawn care equipment industry, with its standout products like the Snapper FLT19540RD, ELT2240RD, and ELT19540RD. Each model comes equipped with a unique set of features, technologies, and characteristics that cater to various lawn care needs.

The Snapper FLT19540RD is a revolutionary lawn tractor designed for efficiency and versatility. It boasts a robust 19.5 horsepower engine, delivering reliable power for mowing, bagging, and mulching. One of the standout features of the FLT19540RD is its 40-inch cutting deck, which provides a wide cutting path, ensuring that large areas are mowed quickly and effectively. The deck can be easily adjusted to achieve different cutting heights, allowing users to maintain their lawns according to personal preference or seasonal requirements. Additionally, the tractor's hydrostatic transmission offers smooth and intuitive operation, enabling users to easily control speed and direction without the need for manual gear shifting.

On the other hand, the Snapper ELT2240RD is more compact and designed for residential homeowners who may have smaller lawns or tighter spaces to navigate. This model features a 22-inch cutting deck and a powerful 40-volt lithium-ion battery, which provides quiet operation and an environmentally friendly alternative to gas-powered mowers. The ELT2240RD is designed with user comfort in mind, incorporating an ergonomic handle and lightweight design, making it easy for anyone to maneuver around the yard. The battery life is impressive, allowing for extended runtime and quick recharging, making it a practical choice for homeowners who prioritize efficiency and sustainability.

Lastly, the ELT19540RD combines the best of both worlds. It features a 19.5 horsepower engine and a spacious 40-inch cutting deck, striking a balance between power and compact design. Its innovative design promotes better air circulation and clippings discharge, leading to enhanced mulching capabilities. The ELT19540RD is equipped with advanced safety features, including a safety switch that ensures the engine only runs when the operator is securely seated.

All three models exemplify Snapper's commitment to quality, innovation, and user-friendly design. They cater to various lawn care needs, whether for a large space or a more intimate garden, providing reliable performance while ensuring an efficient mowing experience. With Snapper, homeowners can be confident in their lawn care choices, enjoying beautifully maintained lawns with minimal effort.