Snapper FLT19540RD, ELT2240RD, ELT19540RD manual Features & Controls

Page 13

Reverse Mowing Option (RMO)

The Reverse Mowing Option allows for mowing (or use of other PTO driven attachments) while traveling in reverse. If you choose to mow in reverse, turn the RMO key after the PTO is engaged. The L.E.D. light will illuminate, and the operator can then mow in reverse. Each time the PTO is engaged the RMO needs to be reactivated if desired.

PTO Switch

The PTO (Power Take-Off) switch engages and disengages attachments that use the PTO. To engage the PTO, pull UP on the switch. Push DOWN to disengage. Note that the operator must be seated firmly in the tractor seat for the PTO to function.

Ignition Switch

The ignition switch starts and stops the engine, it has three positions:

OFF

Stops the engine and shuts off the

 

electrical system.

RUN

Allows the engine to run and powers the

 

electrical system.

START

Cranks the engine for starting.

NOTE: Never leave the ignition switch in the RUN position with the engine stopped–this drains the battery.

Ground Speed Pedals

The tractor’s forward ground speed is controlled by the forward ground speed control pedal. The tractor’s reverse ground speed is controlled by the reverse ground speed control pedal.

Depressing either pedal will increase ground speed. Note that the further down the pedal is depressed, the faster the tractor will travel.

Cruise Control

The cruise control is used to lock the ground speed control in forward. The cruise control has five lock positions.

Features & Controls

Mower Lift Lever

The mower lift lever controls the mower cutting height. Pull lever to lower the height and pull up to raise the height.

Seat Adjustment Lever

The seat can be adjusted forward and back. Move the lever, position the seat as desired, and release the lever to lock the seat into position.

Transmission Release Valve Lever

The transmission release valve lever deactivates the transmission so that the tractor can be pushed by hand. See PUSHING THE TRACTOR BY HAND for operational information.

Fuel Tank

To remove the cap, turn counterclockwise.

12V Power Outlet (Select Models)

The power outlet is 12V-DC. Accessory must be rated at 9 amps or less.

Fuel Level Gauge

Displays the fuel level in the tank.

Parking Brake

The parking brake knob is used to lock the parking brake when the tractor is stopped. Fully depressing the brake pedal and pulling up on the knob engages the parking brake. Refer to page 12 for a full explanation of parking brake functions.

Brake Pedal

Depressing the brake pedal applies the tractor brake.

11

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Mfg. No Title Description HP Hydro TractorsPage Table of Contents Safety Rules & Information Operating Safety Slope Operation Safety Rules and InformationGeneral Operation Safety Rules & InformationIgnition System Safe Handling of Gasoline Service & MaintenanceCE Identification Tag Markings Identification NumbersTractor ID Tag Mower ID Tag Safety Decals Safety DecalsSafety Icons Decal Locations CE Safety IconsTransmission Release Throttle Control Control FunctionsChoke HeadlightsFeatures & Controls Cruise Control Operation Parking Brake FunctionHour Meter General Operating Safety Safety Interlock System TestsOperational Safety Checks Adding FuelOperating the Tractor Removing the Mower Deck Mower Deck Removal & InstallationMuffler and surrounding areas may be hot Lift Lever Tractor Hitch BracketsInstalling the Mower Deck Catcher Removal & InstallationLock Lever Attaching a Trailer Cutting Height AdjustmentStorage Check Tire Pressure Maintenance Schedule & ProceduresRegular Maintenance Hood Removal and Installation Transmission MaintenanceTransmission Identification Lubrication Service Interval Every 25 HoursOil GreaseLubricate Rear Axle Shafts Service Interval YearlyServicing the Mower Blades Service Interval Every 100 Hours or As RequiredCheck Blade Timing Check Mower Blade TimingRecommended Engine Oil Check & Fill Engine OilChange Engine Oil Oil Drain Valve OperationChange Engine Oil & Filter Air Filter Removal & Installation Air Filter & Pre-Cleaner ServicePre-Cleaner Service Air Filter ServiceAir Filter Assembly Single Cylinder Models Latch Cover Spark Plug Gapping Replace Spark PlugRegular Maintenance Troubleshooting the Tractor TroubleshootingTroubleshooting the Mower Troubleshooting, Adjustment, & ServiceBrake Adjustment Seat AdjustmentBattery Charging Fuse ReplacementAdjust PTO Clutch Window Adjustment Nut Feeler Gauge PTO Clutch AdjustmentTo avoid damaging belts. do not PRY Mower Belt ReplacementMower Blade Timing Arbor Drive Belt Replacement19.5 HP* Briggs & Stratton 22 HP* Briggs & StrattonK46 Maintenance Items Replacement Parts

ELT19540RD, FLT19540RD, ELT2240RD specifications

Snapper has established itself as a leader in the lawn care equipment industry, with its standout products like the Snapper FLT19540RD, ELT2240RD, and ELT19540RD. Each model comes equipped with a unique set of features, technologies, and characteristics that cater to various lawn care needs.

The Snapper FLT19540RD is a revolutionary lawn tractor designed for efficiency and versatility. It boasts a robust 19.5 horsepower engine, delivering reliable power for mowing, bagging, and mulching. One of the standout features of the FLT19540RD is its 40-inch cutting deck, which provides a wide cutting path, ensuring that large areas are mowed quickly and effectively. The deck can be easily adjusted to achieve different cutting heights, allowing users to maintain their lawns according to personal preference or seasonal requirements. Additionally, the tractor's hydrostatic transmission offers smooth and intuitive operation, enabling users to easily control speed and direction without the need for manual gear shifting.

On the other hand, the Snapper ELT2240RD is more compact and designed for residential homeowners who may have smaller lawns or tighter spaces to navigate. This model features a 22-inch cutting deck and a powerful 40-volt lithium-ion battery, which provides quiet operation and an environmentally friendly alternative to gas-powered mowers. The ELT2240RD is designed with user comfort in mind, incorporating an ergonomic handle and lightweight design, making it easy for anyone to maneuver around the yard. The battery life is impressive, allowing for extended runtime and quick recharging, making it a practical choice for homeowners who prioritize efficiency and sustainability.

Lastly, the ELT19540RD combines the best of both worlds. It features a 19.5 horsepower engine and a spacious 40-inch cutting deck, striking a balance between power and compact design. Its innovative design promotes better air circulation and clippings discharge, leading to enhanced mulching capabilities. The ELT19540RD is equipped with advanced safety features, including a safety switch that ensures the engine only runs when the operator is securely seated.

All three models exemplify Snapper's commitment to quality, innovation, and user-friendly design. They cater to various lawn care needs, whether for a large space or a more intimate garden, providing reliable performance while ensuring an efficient mowing experience. With Snapper, homeowners can be confident in their lawn care choices, enjoying beautifully maintained lawns with minimal effort.
Top Page Image Contents