Operating the Tractor

Stopping the Tractor & Engine

1.Return the ground speed control(s) to neutral.

2.Disengage the PTO and wait for all moving parts to stop.

3.Briggs & Stratton Models: Move the throttle control to SLOW position and turn the ignition key to OFF. Remove the key.

Driving the Tractor

1.Sit in the seat and adjust the seat so that you can comfortably reach all the controls and see the dashboard display.

2.Engage the parking brake.

3.Make sure the PTO switch is disengaged.

4.Start the engine (see STARTING THE ENGINE).

5.Disengage the parking brake and release the brake pedal.

6.Depress the forward ground speed control pedal to travel forward. Release the pedal to stop. Note that the further down the pedal is depressed the faster the tractor will travel.

7.Stop the tractor by releasing the ground speed control pedals, setting the parking brake, and stopping the engine (see STOPPING THE TRACTOR AND ENGINE).

Mowing

1.Set the mower cutting height to the desired level and set the gauge wheels to the appropriate position (if equipped).

2.Engage the parking brake. Make sure the PTO switch is disengaged.

3.Start the engine (see STARTING THE ENGINE).

4.Fully lower the mower using the attachment lift lever and set cutting height.

5.Set the throttle to FULL.

6.Engage the PTO (Mower Deck).

7.Begin mowing. See Section LC for tips on mowing patterns, lawn care, and troubleshooting information.

8.When finished, shut off the PTO and raise the mower using the attachment lift control lever.

9.Stop the engine (see STOPPING THE TRACTOR AND ENGINE).

WARNING

The engine will shut off if the reverse ground speed pedal is depressed while the PTO is on and the RMO has not been activated. The operator should always turn the PTO off prior to driving across on roads, paths or any area that maybe used by other vehicles. Sudden loss of drive could create a hazard.

WARNING

Mowing in reverse can be hazardous to bystanders. Tragic accidents can occur if the operator is not alert to the presence of children. Never activate RMO if children are present. Children are often attracted to the unit and the mowing activity.

Mowing in Reverse

If an operator chooses to mow in reverse, the RMO system can be used. To use the Reverse Mowing Option (RMO) turn the RMO key after the PTO is engaged. The L.E.D. light will illuminate, and the operator can then mow in reverse. Each time the PTO is engaged the RMO needs to be reactivated if desired. The key should be removed to restrict access to the RMO feature.

Attachment Operation in Reverse

If an operator chooses to operate a PTO driven attachment in reverse, the RMO system can be used. To use the Reverse Mowing Option (RMO) turn the RMO key after the PTO is engaged. The L.E.D. light will illuminate, and the operator can then operate the attachment in reverse. Each time the PTO is disengaged the RMO needs to be reactivated if desired. The key should be removed to restrict access to the RMO feature.

Pushing the Tractor by Hand

1.Disengage the PTO and turn the engine off.

2.Pull the transmission release (B, Figure 3) back approximately 2-3/8” (6 cm) to lock into released position.

3.The tractor can now be pushed by hand.

DO NOT TOW

TRACTOR

Towing the unit will cause transmission damage. • Do not use another vehicle to push or pull this unit.

• Do not actuate the transmission release valve lever while the engine is running.

Figure 2. Transmission Release Lever & Fuel Tank

A.Fuel Tank Cap

B.Transmission Release Lever

ELT19540RD, FLT19540RD, ELT2240RD specifications

Snapper has established itself as a leader in the lawn care equipment industry, with its standout products like the Snapper FLT19540RD, ELT2240RD, and ELT19540RD. Each model comes equipped with a unique set of features, technologies, and characteristics that cater to various lawn care needs.

The Snapper FLT19540RD is a revolutionary lawn tractor designed for efficiency and versatility. It boasts a robust 19.5 horsepower engine, delivering reliable power for mowing, bagging, and mulching. One of the standout features of the FLT19540RD is its 40-inch cutting deck, which provides a wide cutting path, ensuring that large areas are mowed quickly and effectively. The deck can be easily adjusted to achieve different cutting heights, allowing users to maintain their lawns according to personal preference or seasonal requirements. Additionally, the tractor's hydrostatic transmission offers smooth and intuitive operation, enabling users to easily control speed and direction without the need for manual gear shifting.

On the other hand, the Snapper ELT2240RD is more compact and designed for residential homeowners who may have smaller lawns or tighter spaces to navigate. This model features a 22-inch cutting deck and a powerful 40-volt lithium-ion battery, which provides quiet operation and an environmentally friendly alternative to gas-powered mowers. The ELT2240RD is designed with user comfort in mind, incorporating an ergonomic handle and lightweight design, making it easy for anyone to maneuver around the yard. The battery life is impressive, allowing for extended runtime and quick recharging, making it a practical choice for homeowners who prioritize efficiency and sustainability.

Lastly, the ELT19540RD combines the best of both worlds. It features a 19.5 horsepower engine and a spacious 40-inch cutting deck, striking a balance between power and compact design. Its innovative design promotes better air circulation and clippings discharge, leading to enhanced mulching capabilities. The ELT19540RD is equipped with advanced safety features, including a safety switch that ensures the engine only runs when the operator is securely seated.

All three models exemplify Snapper's commitment to quality, innovation, and user-friendly design. They cater to various lawn care needs, whether for a large space or a more intimate garden, providing reliable performance while ensuring an efficient mowing experience. With Snapper, homeowners can be confident in their lawn care choices, enjoying beautifully maintained lawns with minimal effort.