Snapper FLT19540RD, ELT2240RD manual 22 HP* Briggs & Stratton, 19.5 HP* Briggs & Stratton, K46

Page 39

Specifications

NOTE: Specifications are correct at time of printing and are subject to change without notice.

ENGINE:

22 HP* Briggs & Stratton

Make

Briggs & Stratton

Model

Intek

Horsepower

22

@ 2700 +/- 100 rpm

Displacement

44.2 Cu. in (724 cc)

Electrical System

12

Volt, 9 amp. Alternator, Battery: 230 CCA

Oil Capacity

64

Oz. (1.9 L)

19.5 HP* Briggs & Stratton

Make

Briggs & Stratton

Model

Intek

 

Horsepower

19.5

@ 2700 +/- 100 rpm

Displacement

30.5

Cu. in (500 cc)

Electrical System

12

Volt, 9 amp. Alternator, Battery: 230 CCA

Oil Capacity

48

Oz. (1.4 L)

CHASSIS:

Fuel Tank Cap.

Capacity: 2.5 Gallons (9,4 L)

Rear Wheels

Tire Size: 22 x 10 -8

 

Inflation Pressure: 10 psi (,68 bar)

Front Wheels

Tire Size: 15 x 6.0-6

 

Inflation Press.: 12-14 psi (,82-0,96 bar)

TRANSMISSION:

K46

Type

Hydrostatic Tuff Torq K46

Hydraulic Fluid

10w 30 Premium Engine Oil

Speeds

Forward: 0-5.5 MPH (9.0 km/h)

@ 3400 rpm

Reverse: 0-3.0 MPH (4.6 km/h)

Continuous Torque

170 ft-lbs.

Output

 

Drawbar Rating

227 lbs (103 kg)

Maximum Weight

675 lbs (306 kg)

on Axle

 

DIMENSIONS:

Overall Length

103”

Overall Width

42”

Height

49”

Weight:

617 lbs (280 kg)

19.5hp or 22 hp Tractor w/ 40” Mower Deck

*Briggs & Stratton Models: The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower values are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among other things, ambient operating conditions and engine-to-engine variability. Given both the wide array of products on which engines are placed and the variety of environmental issues applicable to operating the equipment, the gas engine will not develop the rated gross power when used in a given piece of power equipment (actual "on-site" or net horsepower). This difference is due to a variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this Series engine.

37

Image 39
Contents Mfg. No Title Description HP Hydro TractorsPage Table of Contents Safety Rules & Information Operating Safety Slope Operation Safety Rules and InformationGeneral Operation Safety Rules & InformationIgnition System Safe Handling of Gasoline Service & MaintenanceIdentification Numbers CE Identification Tag MarkingsTractor ID Tag Mower ID Tag Safety Decals Safety DecalsSafety Icons CE Safety Icons Decal LocationsTransmission Release Headlights Control FunctionsThrottle Control ChokeFeatures & Controls Parking Brake Function Cruise Control OperationHour Meter Adding Fuel Safety Interlock System TestsGeneral Operating Safety Operational Safety ChecksOperating the Tractor Lift Lever Tractor Hitch Brackets Mower Deck Removal & InstallationRemoving the Mower Deck Muffler and surrounding areas may be hotCatcher Removal & Installation Installing the Mower DeckLock Lever Cutting Height Adjustment Attaching a TrailerStorage Check Tire Pressure Maintenance Schedule & ProceduresRegular Maintenance Transmission Maintenance Hood Removal and InstallationTransmission Identification Grease Service Interval Every 25 HoursLubrication OilLubricate Rear Axle Shafts Service Interval YearlyServicing the Mower Blades Service Interval Every 100 Hours or As RequiredCheck Blade Timing Check Mower Blade TimingRecommended Engine Oil Check & Fill Engine OilOil Drain Valve Operation Change Engine OilChange Engine Oil & Filter Air Filter Service Air Filter & Pre-Cleaner ServiceAir Filter Removal & Installation Pre-Cleaner ServiceAir Filter Assembly Single Cylinder Models Latch Cover Spark Plug Gapping Replace Spark PlugRegular Maintenance Troubleshooting the Tractor TroubleshootingTroubleshooting the Mower Troubleshooting, Adjustment, & ServiceFuse Replacement Seat AdjustmentBrake Adjustment Battery ChargingAdjust PTO Clutch Window Adjustment Nut Feeler Gauge PTO Clutch AdjustmentTo avoid damaging belts. do not PRY Mower Belt ReplacementMower Blade Timing Arbor Drive Belt Replacement22 HP* Briggs & Stratton 19.5 HP* Briggs & StrattonK46 Maintenance Items Replacement Parts

ELT19540RD, FLT19540RD, ELT2240RD specifications

Snapper has established itself as a leader in the lawn care equipment industry, with its standout products like the Snapper FLT19540RD, ELT2240RD, and ELT19540RD. Each model comes equipped with a unique set of features, technologies, and characteristics that cater to various lawn care needs.

The Snapper FLT19540RD is a revolutionary lawn tractor designed for efficiency and versatility. It boasts a robust 19.5 horsepower engine, delivering reliable power for mowing, bagging, and mulching. One of the standout features of the FLT19540RD is its 40-inch cutting deck, which provides a wide cutting path, ensuring that large areas are mowed quickly and effectively. The deck can be easily adjusted to achieve different cutting heights, allowing users to maintain their lawns according to personal preference or seasonal requirements. Additionally, the tractor's hydrostatic transmission offers smooth and intuitive operation, enabling users to easily control speed and direction without the need for manual gear shifting.

On the other hand, the Snapper ELT2240RD is more compact and designed for residential homeowners who may have smaller lawns or tighter spaces to navigate. This model features a 22-inch cutting deck and a powerful 40-volt lithium-ion battery, which provides quiet operation and an environmentally friendly alternative to gas-powered mowers. The ELT2240RD is designed with user comfort in mind, incorporating an ergonomic handle and lightweight design, making it easy for anyone to maneuver around the yard. The battery life is impressive, allowing for extended runtime and quick recharging, making it a practical choice for homeowners who prioritize efficiency and sustainability.

Lastly, the ELT19540RD combines the best of both worlds. It features a 19.5 horsepower engine and a spacious 40-inch cutting deck, striking a balance between power and compact design. Its innovative design promotes better air circulation and clippings discharge, leading to enhanced mulching capabilities. The ELT19540RD is equipped with advanced safety features, including a safety switch that ensures the engine only runs when the operator is securely seated.

All three models exemplify Snapper's commitment to quality, innovation, and user-friendly design. They cater to various lawn care needs, whether for a large space or a more intimate garden, providing reliable performance while ensuring an efficient mowing experience. With Snapper, homeowners can be confident in their lawn care choices, enjoying beautifully maintained lawns with minimal effort.