Snapper CP215017KWV, CP216017RV, CP214017R2 Replacing Bearing In Driven Disc

Page 16

Section 4 - REPAIR & ADJUSTMENTS

WARNING

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

4.3.4.Replacing Driven Disc Rubber Ring (Continued From Previous Page)

2.Using needle nose pliers, unhook the drive spring and slide the driven disc assembly off the hex shaft. See Figure 4.11.

3.Remove the five machine screws and plate which secure the rubber ring to the driven disc hub. See Figure 4.12.

4.Install new rubber ring.

5.Reverse above procedures for reassembly and installation.

4.3.5. Replacing Bearing In Driven Disc

If the driven disc bearing fails, remove the driven disc assembly and replace bearing as follows:

1.Remove snap ring. See Figure 4.13.

THRUST

SHIM

PLATE

WASHER

 

SNAP

 

RING

BEARING

 

REMOVE FOUR

 

MACHINE SCREWS

 

 

DRIVEN

 

DISC HUB

DRIVEN DISC

RUBBER

DISC

PLATE

 

 

 

FIGURE 4.13

2.Slide the hub assembly out of the bearing.

3.Remove the four screws.

4.Remove bearing and replace with new bearing.

5.Reassemble components in reverse order.

DRIVEN DISC

ASSEMBLY

FIGURE 4.11

DRIVEN DISC HUB

MACHINE

SCREWS

RUBBER

RING

PLATE

FIGURE 4.12

16

Image 16
Contents Steel Deck Walk Mowers Commercial Model Series Important Safety Instructions Operation Table of Contents Introduction NomenclatureStarting & Operation 2.2.1. Engine & Blade PRE-START Check ListTurn fuel valve to on. See .1. Move Handle Height Adjustment Cutting Height AdjustmentStopping Recycling Operation Optional Accessory Installation of Grass CatcherMaintenance Service After First 5 Hours 3.2.1. Change Engine OILCheck Mower Blade Check Grease Level in TransmissionCheck Engine Drive Belt Storage Procedure Service AnnuallyEngine Air Filter Engine Oil Mower Blade Replacement 4.1.1. Standard Blade Wear Limit Blade SharpeningDriven Disc Service Wheel Drive Control AdjustmentOn next Drive Spring Repair/Replacement Driven Disc AdjustmentReplacing Driven Disc Rubber Ring Replacing Bearing In Driven Disc Belt Service Engine Drive Belt Replacement Stretch Type BeltsPulley Position Troubleshooting Problem Probable Cause Corrective ActionMAINTENANCE/REPLACEMENT Parts Service Performed EachUSE HRS Season Year Limited Warranty Disclaimer of WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Service Notes Service Notes Steel Deck Walk Mowers Commercial Model Series

CP216017RV, CP215017KWV, CP215017HV, CP215517HV, CP215017KWV, CP216017RV, CP214017R2 specifications

The Snapper CP216017RV, CP215017KWV, CP215017HV, CP215517HV, CP215017KWV, CP216017RV, and CP214017R2 are part of Snapper's innovative line of outdoor power equipment, specifically designed for residential lawn care and landscaping needs. These models combine robust engineering with user-friendly features, making them ideal choices for homeowners seeking efficiency and performance in yard maintenance.

One of the standout features across these models is their powerful engine options. For instance, the CP216017RV typically houses a reliable Briggs & Stratton engine that delivers superior performance and torque, enabling it to tackle thick grass and varied terrain with ease. This powerful engine is complemented by a high-capacity fuel tank, offering longer runtimes and reducing the need for frequent refueling during mowing tasks.

In terms of cutting performance, Snapper has designed these models with advanced cutting decks that feature adjustable cutting heights. This enables users to customize their mowing experience, ensuring an even cut suitable for various grass types and conditions. Some models may come equipped with steel cutting decks, enhancing durability and providing a consistent cut over time.

User comfort and convenience are also key aspects of these Snapper models. Ergonomically designed handles provide a comfortable grip and can often be adjusted to accommodate users of different heights. Additionally, many of these models are equipped with features like easy-start technology, eliminating the hassle of traditional pull-start mechanisms and allowing for quick and effortless operation.

With technologies such as the Recycler system, users can benefit from a mulching capability that finely shreds grass clippings, returning nutrients to the lawn while minimizing waste. Moreover, select models offer a bagging option for easy collection of clippings, making cleanup easier and promoting a tidy yard.

The Snapper CP216017RV, CP215017KWV, CP215017HV, CP215517HV, CP215017KWV, CP216017RV, and CP214017R2 models are not only designed for performance but also for reliability and ease of maintenance. Features such as tool-free assembly for cleaning and routine maintenance ensure that users can keep their mowers in optimal condition without unnecessary complications.

Overall, Snapper continues to innovate with these models, meeting the diverse landscaping needs of modern homeowners while ensuring ease of use and exemplary performance in yard care.